I recall being able to run my motors (servos + DCs) fine with a 9V DC Jack to the wall or a battery. Suddenly, everything stopped working. I'm getting the error "ERROR: battery disconnected or insufficiently charged to drive servos\n" with rc_test_servos and rc_test_motors just isn't making anything move (1 motor vibrates a TINY bit).
My readings for rc_test_adc are the following: adc_0 | adc_1 | adc_2 | adc_3 |DC_Jack|Battery| 1.75 | 1.63 | 1.72 | 1.02 | 9.25 | 0.00 | Obviously 1V seems very low. I've tried plugging this to the wall, with a 9V duracell and a 4-cell lipo connected through the DC jack. Anyone know what could be the issue? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0e82a452-6067-4714-9802-2ac2b9e8f23a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
