I did. I even ran examples provided by TI, and the one for PRU1 does not work.
Jacek. On Wed, Feb 13, 2019 at 1:30 PM <[email protected]> wrote: > Did you change the interrupt numbers? > > /* The PRU-ICSS system events used for RPMsg are defined in the Linux > device tre > e > * PRU0 uses system event 16 (To ARM) and 17 (From ARM) > * PRU1 uses system event 18 (To ARM) and 19 (From ARM) > */ > #define TO_ARM_HOST 18 > #define FROM_ARM_HOST 19 > > > > Regards, > Dimitar > > On Wednesday, February 13, 2019 at 10:02:25 AM UTC+2, Jacek Radzikowski > wrote: >> >> Hello, >> >> I have problems with receiving remoteproc messages on PRU1. The code >> works fine when configured and executed on PRU0, but PRU1 never receives >> any interrupts (event numbers set for each PRU accordingly). >> I modified examples PRU_RPMsg_Echo_Interrupt0 and >> PRU_RPMsg_Echo_Interrupt1 to flip I/O pins with LEDs whenever interrupt >> comes. >> On PRU0 example works as expected. Each time a message comes, the LED >> switches state. However, example for PRU1 behaves like it never receives >> any interrupts from ARM host. In my application I'm using interrupts to >> signal PRU1 from PRU0, and hey work fine. >> Has anybody been able to resolve this issue? >> >> I'm running kernel 4.14.94-ti-r93 on Debian Image 2019-01-27, with PRU >> tools installed by ti-pru-cgt-installer 2.1.5-0rcnee1~stretch+20180514 >> >> Regards, >> Jacek. >> >> >> -- >> Given a choice between two theories, take the one which is funnier >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/9ade0464-7903-4a00-9885-4649b243c1b7%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/9ade0464-7903-4a00-9885-4649b243c1b7%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Given a choice between two theories, take the one which is funnier -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAA2oDvY7xvQfc3NvHMe4kRSenwLPQ2rKobi%3DE4RMW_jPB%2B8M-Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
