Hello, I am trying to send data from the ARM processor to the PRU using rpmsg. After following Greg's guide found here: https://github.com/Greg-R/pruadc1/blob/master/doc/PRUADC1latex/PRUADC1.pdf, I am still unable to see any rpmsg_pru* files in the dev folder. Are there additional instructions for creating the rpmsg_pru* files for newer images and kernels?
Debian image: bone-debian-9.5-iot-armhf-2018-10-07-4gb.img uname -r: 4.14.71-ti-r80 lsmod: Module Size Used by 8021q 32768 0 garp 16384 1 8021q mrp 20480 1 8021q stp 16384 1 garp llc 16384 2 garp,stp binfmt_misc 20480 1 pru_rproc 28672 0 pruss_soc_bus 16384 0 evdev 24576 1 uio_pdrv_genirq 16384 0 uio 20480 1 uio_pdrv_genirq usb_f_mass_storage 53248 2 usb_f_acm 16384 2 u_serial 20480 3 usb_f_acm usb_f_ecm 20480 2 usb_f_rndis 32768 4 u_ether 20480 2 usb_f_ecm,usb_f_rndis libcomposite 65536 18 usb_f_ecm,usb_f_acm,usb_f_mass_storage,usb_f_rndis iptable_nat 16384 0 nf_conntrack_ipv4 20480 1 nf_defrag_ipv4 16384 1 nf_conntrack_ipv4 nf_nat_ipv4 16384 1 iptable_nat nf_nat 32768 1 nf_nat_ipv4 nf_conntrack 143360 3 nf_conntrack_ipv4,nf_nat_ipv4,nf_nat iptable_mangle 16384 0 iptable_filter 16384 0 spidev 20480 0 pruss 16384 1 pru_rproc pruss_intc 16384 1 pru_rproc ip_tables 24576 3 iptable_mangle,iptable_filter,iptable_nat x_tables 36864 3 iptable_mangle,ip_tables,iptable_filter Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e50350b7-5f24-4e1d-a046-53bdd457c580%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
