Thank you very much Hugo El lun., 18 de mar. de 2019 07:18, <[email protected]> escribió:
> Hello Hugo, > > you can disable with editing the file* /boot/uEnv.txt* > Check your kernel version before ( *uname -r *) > > For *v3.8.x* kernel: > #Disable HDMI/eMMC > > cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G > #Disable HDMI > cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN > #Disable eMMC > cape_disable=capemgr.disable_partno=BB-BONE-EMMC-2G > > > For *v4.1.x* kernel: > #HDMI (Audio/Video) disabled: > dtb=am335x-boneblack-emmc-overlay.dtb > #eMMC disabled: > dtb=am335x-boneblack-hdmi-overlay.dtb > #HDMI Audio/eMMC disabled: > dtb=am335x-boneblack-nhdmi-overlay.dtb > #HDMI (Audio/Video)/eMMC disabled: > dtb=am335x-boneblack-overlay.dtb > > > For *v4.4.x, v4.9.x, v4.14.x and higher* kernel: > ##Disable auto loading of virtual capes (emmc/video/wireless/adc) > #Disable eMMC > disable_uboot_overlay_emmc=1 > #Disable HDMI > disable_uboot_overlay_video=1 > #Disable Audio > disable_uboot_overlay_audio=1 > #Disable Wireless > disable_uboot_overlay_wireless=1 > #Disable ADC > disable_uboot_overlay_adc=1 > > > > > Le dimanche 17 mars 2019 14:57:30 UTC+1, [email protected] a écrit : >> >> >> Hello >> >> In my project I am needing to use 30 pins of the P8 expansion header >> and 6 pins of the P9 expansion header as GPIO only, also I will use all >> analog pins(P9). I do not need to use the HDMI neither eMMc pins . I have >> been reading information about this and I believe is necessary to >> configure the BBB to operate in mode 7. >> >> How can I do it? >> >> Thanks >> >> Hugo >> >> >> >> >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/5dfd71c1-a390-486e-a02f-9138be583f89%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/5dfd71c1-a390-486e-a02f-9138be583f89%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGvkCdWJTVBDaX%2B3ugi%2BKv-sQXbA9AgSLZPQkwwncK0eatPJUA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
