Right after I posted that I realized the same thing and decided to flip the SD card over to a BBB Industrial (don't have a regular "black" sitting here, need to go digging). It does work there as long as I get the bootloader updated to 2018.09. Doesn't work with 2018.01. OK. At least we know where the issue is. ;) That's a good step.
Dan On Wednesday, March 27, 2019 at 1:15:10 PM UTC-4, RobertCNelson wrote: > > On Wed, Mar 27, 2019 at 12:04 PM Daniel Kulp <[email protected] <javascript:>> > wrote: > > > > > eeprom:[A335BNLTSE0A4518BBE911FC] > > model:[SanCloud_BeagleBone_Enhanced]:WiFi AP Enabled:[ > https://github.com/lwfinger/rtl8723bu] > > There's the problem, why didn't i see this before in your previous emails? > > For the cape-universal "rewrite" to work, u-boot needs to load > "am335x-sancloud-bbe-uboot-univ.dtb" however today v4.19.x-bone only > has: > > debian@beaglebone:/boot/dtbs/4.19.29-bone29$ find . | grep univ > ./am335x-bone-uboot-univ.dtb > ./am335x-boneblack-uboot-univ.dtb > ./am335x-bonegreen-wireless-uboot-univ.dtb > > debian@beaglebone:/boot/dtbs/4.19.25-ti-r16$ find . | grep univ > ./am335x-bone-uboot-univ.dtb > ./am335x-boneblack-uboot-univ.dtb > ./am335x-bonegreen-wireless-uboot-univ.dtb > > debian@beaglebone:/boot/dtbs/4.14.103-ti-r100$ find . | grep univ > ./am335x-bone-uboot-univ.dtb > ./am335x-boneblack-uboot-univ.dtb > ./am335x-bonegreen-wireless-uboot-univ.dtb > > debian@beaglebone:/boot/dtbs/4.14.103-ti-r100$ find . | grep bbe > ./am335x-sancloud-bbe.dtb > > So yeah, i need to grab my bbe, (pretty sure it's at home) and build > the *-univ.dtb" files.. > > > dogtag:[BeagleBoard.org Debian Image 2018-10-07] > > bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot > 2018.09-00002-g9d95a561c9]:[location: dd MBR] > > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > 2018.09-00002-g9d95a561c9]:[location: dd MBR] > > kernel:[4.19.29-bone29] > > uboot_overlay_options:[enable_uboot_overlays=1] > > > uboot_overlay_options:[uboot_overlay_addr4=/lib/firmware/BB-I2C2-FAST-00A0.dtbo] > > > > uboot_overlay_options:[disable_uboot_overlay_video=1] > > uboot_overlay_options:[disable_uboot_overlay_audio=1] > > > uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo] > > > > uboot_overlay_options:[enable_uboot_cape_universal=1] > > pkg check: to individually upgrade run: [sudo apt install --only-upgrade > <pkg>] > > pkg:[bb-cape-overlays]:[4.4.20190320.1-0rcnee0~stretch+20190320] > > pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0~stretch+20190227] > > pkg:[kmod]:[23-2rcnee1~stretch+20171005] > > WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED] > > pkg:[firmware-ti-connectivity]:[20180825+dfsg-1rcnee1~stretch+20181217] > > groups:[debian : debian adm kmem dialout cdrom floppy audio dip video > plugdev users systemd-journal netdev gpio pwm eqep admin spi i2c tisdk > weston-launch xenomai bluetooth cloud9ide] > > cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 > root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M > net.ifnames=0 rootwait quiet] > > dmesg | grep remote > > [ 0.628740] remoteproc remoteproc0: wkup_m3 is available > > [ 0.940053] remoteproc remoteproc0: powering up wkup_m3 > > [ 0.940074] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217168 > > [ 0.942727] remoteproc remoteproc0: remote processor wkup_m3 is now > up > > dmesg | grep pru > > > > root@FPPTest:/opt/scripts/tools# config-pin -q P9.11 > > P9_11 pinmux file not found! > > Cannot read pinmux file: > /sys/devices/platform/ocp/ocp*P9_11_pinmux/state > > > > If I can get it working with 4.19, I'd be OK with that, but right now, > it's not. Since I'm trying to create new images for my devices, I can > definitely move everything to 4.19. The "problem" I have is a couple of > the out-of-kernel wifi drivers I build/include don't yet build properly > with 4.19 which is why I've considered staying on 4.14. That's a minor > issue though. > > it looks like the rtl8723bu built.. does it not work? are they > shipping with the rtl8821cu now too? > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5582690d-4857-45ef-bd31-5ccf440c896d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
