I get the same error when I run the script "kernel does not include CapeMgr module" Were you ever able to find a solution to this problem? I am running the same code example using bonescript but no luck.
On Sunday, January 14, 2018 at 2:00:54 PM UTC-5, [email protected] wrote: > > Hi, > > I am seeing the same error when trying to read from serial port UART4. > "kernel does not include capemgr module " > > Any help please? > > > On Friday, April 1, 2016 at 12:06:01 AM UTC+5:30, Wally Bkg wrote: >> >> I don't think this is the problem. /dev/ttyS1 exists and works with >> minicom (as root, after doing the config-pin uart commands) /dev/ttyO1 is >> a link to /dev/ttyS1. While it may not be "optimal" by default the >> Bonescript and Cloud9 stuff run as root, which I think is a good choice >> initially as there would be no end to permission problems, especially from >> Beaglebone users with Windows hosts. >> >> I don't think anyone should put a Beaglebone or Raspberry Pi, etc. live >> on the Internet, if you need to do it that's a whole lot of extra expertise >> required. OTOH I'm happy with my IOT SBCs running behind a solid firewall >> for outgoing connections with trusted status among them after setting >> strong passwords on the default accounts and disabling root login over SSH. >> If I needed to serve up data to the live Internet from my IOT devices, I'd >> use a third party website as a middle man -- one of the public mqtt brokers >> would be a good place to start depending how "private" you need to keep >> your data. >> >> >> On Thursday, March 31, 2016 at 12:57:37 PM UTC-5, [email protected] >> wrote: >>> >>> sudo groups $username | grep dialout > /dev/null >>> reboot >>> >>> sudo sh -c "echo 'BB-UART1' > /sys/devices/platform/bone_capemgr/slots" >>> cat /sys/devices/platform/bone_capemgr/slots >>> >>> 0: PF---- -1 ne_capemgr/slots"pploader/bin# sh -c "echo 'BB-UART1' > >>> /sys/devic >>> 1: PF---- -1 >>> 2: PF---- -1 >>> 3: PF---- -1 >>> 4: P-O-L- 0 Override Board Name,00A0,Override Manuf,BB-UART1 >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3c6a42cf-2797-48f0-8bc2-c6940d7b61da%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
