Hi, The limit is in the RAM on the WiLink8. There is only enough to hold the state information for 10 connections. The 11th connection will just fail. Iain
On Friday, April 5, 2019 at 3:25:46 PM UTC+1, don_wrt wrote: > > Dear All, > > At most how many beaglebone black wireless modules have you ever connected > to each other at the same time within a mesh network ? There are some > constraints for TI Wilink8 chip. One of them is maximum number of connected > peers per single peer in the network. It is 10 in the user guide doc. Is it > a Wilink8 hardware caused limit or driver limit? What will be possible > results when connecting more than 10 beaglebones at the same time within a > network? > > Thank you. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c6dcee29-39a9-49b1-a809-03bd239cc19d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
