Dear Robert, Do I take only TCK, TMS, TDI, TDO, TRST, VCC and GND ? Or will I solder directly a 20-pin header ? I need also an JTAG-to-USB emulator, Right? and also its driver. I have a problem about the wifi. I have a stable mesh networking with 4-nodes. After joining the 5. node, network will become unstable and collapse. I try to debug this error. Is it feasible such a debug in code composer studio?
Thank you. On Tuesday, April 16, 2019 at 6:21:58 PM UTC+3, RobertCNelson wrote: > > On Tue, Apr 16, 2019 at 10:07 AM don_wrt > <[email protected] <javascript:>> wrote: > > > > Hello, > > > > I have a problem about the beaglebone black wireless. Then I want to > debug it. I cannot see a JTAG port. But there is a serial port for debug. I > wonder that error codes from serial debug port is the same with error codes > or logs returned to ssh terminal through Micro USB port ? If both debian > terminal through micro USB and serial debug port return the same error > codes, It would not useful for me. I have expected that serial debug port > gives something detailed error codes or logs. JTAG would be great to debug > codes. Can I debug codes on the Code Composer Studio through serial debug > port line by line? Otherwise, I don't think I can find the problem without > debugging codes line by line. > > JTAG on the BeagleBone Black Wireless, requires you to solder a 20-pin > CTI header on the back of the board. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8241255a-cb3c-4303-9522-732c3680b483%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
