Hey :)
I've run into the very same problem.
I created two partitions:
- smaller FAT: I copied the
- MLO (secondary bootloader)
- u-boot.img on it
- Ext4: It contains the:
- the kernel and device tree under /boot
- rootfs
When I insert the SD card into my BBB and power it up while pressing S2, I
get the very same error message:
"Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 *"
I don't really understand it. It looks like my bootloader on the first
partition didn't even get started. Furthermore it seems to look for a file
which I don't have (uboot.env). But even if I did have it, my /boot folder
in on the second partition, not on the first one...
Did you manage to resolve it?
Thank you in advance!
On Monday, April 15, 2019 at 1:02:34 PM UTC+2, [email protected] wrote:
>
> Hi
>
> I am trying to boot from uSD card, but I am getting some error. and the
> board not booted.
>
> I worked by reffering to this site :
> https://www.digikey.com/eewiki/display/linuxonarm/BeagleBone+Black
>
> I don't know why it didn't boot.
>
> please let me know how to resolve it.
>
> *here is the terminal messge when it is booting*
>
> U-Boot SPL 2018.09-rc3-dirty (Apr 12 2019 - 05:32:30 -0700)
> Trying to boot from MMC1
> Loading Environment from EXT4... ** File not found /boot/uboot.env **
>
> ** Unable to read "/boot/uboot.env" from mmc0:1 **
>
>
> U-Boot 2018.09-rc3-dirty (Apr 12 2019 - 05:32:30 -0700)
>
> CPU : AM335X-GP rev 2.1
> I2C: ready
> DRAM: 512 MiB
> No match for driver 'omap_hsmmc'
> No match for driver 'omap_hsmmc'
> Some drivers were not found
> Reset Source: Power-on reset has occurred.
> RTC 32KCLK Source: External.
> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Loading Environment from EXT4... ** File not found /boot/uboot.env **
>
> ** Unable to read "/boot/uboot.env" from mmc0:1 **
> Board: BeagleBone Black
> <ethaddr> not set. Validating first E-fuse MAC
> BeagleBone Black:
> BeagleBone: cape eeprom: i2c_probe: 0x54:
> BeagleBone: cape eeprom: i2c_probe: 0x55:
> BeagleBone: cape eeprom: i2c_probe: 0x56:
> BeagleBone: cape eeprom: i2c_probe: 0x57:
> Net: eth0: MII MODE
> cpsw, usb_ether
> Press SPACE to abort autoboot in 2 seconds
> board_name=[A335BNLT] ...
> board_rev=[00C0] ...
> switch to partitions #0, OK
> mmc0 is current device
> SD/MMC found on device 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> gpio: pin 56 (gpio 56) value is 0
> gpio: pin 55 (gpio 55) value is 0
> gpio: pin 54 (gpio 54) value is 0
> gpio: pin 53 (gpio 53) value is 1
> switch to partitions #0, OK
> mmc0 is current device
> gpio: pin 54 (gpio 54) value is 1
> Checking for: /uEnv.txt ...
> Checking for: /boot.scr ...
> Checking for: /boot/boot.scr ...
> Checking for: /boot/uEnv.txt ...
> gpio: pin 55 (gpio 55) value is 1
> 29 bytes read in 12 ms (2 KiB/s)
> Loaded environment from /boot/uEnv.txt
> Checking if uname_r is set in /boot/uEnv.txt...
> gpio: pin 56 (gpio 56) value is 1
> Running uname_boot ...
> loading /boot/vmlinuz-4.14.106-bone-rt-r20 ...
> 9028096 bytes read in 581 ms (14.8 MiB/s)
> debug: [enable_uboot_overlays=] ...
> loading /boot/dtbs/4.14.106-bone-rt-r20/am335x-boneblack.dtb ...
> 60915 bytes read in 29 ms (2 MiB/s)
> uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to
> enable...
> debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4
> rootwait] ...
> debug: [bootz 0x82000000 - 0x88000000] ...
> ## Flattened Device Tree blob at 88000000
> Booting using the fdt blob at 0x88000000
> Loading Device Tree to 8ffee000, end 8ffffdf2 ... OK
>
> Starting kernel ...
>
> [ 0.000000] Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 4.14.106-bone-rt-r20 (son@ubuntu) (gcc
> version 7.4.1 20181213 [linaro-7.4-2019.02 revision
> 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1
> PREEMPT RT Fri Apr 12 05:04:15 PDT 2019
> [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
> cr=50c5387d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
> [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
> [ 0.000000] Memory policy: Data cache writeback
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] cma: Reserved 48 MiB at 0x9d000000
> [ 0.000000] CPU: All CPU(s) started in SVC mode.
> [ 0.000000] AM335X ES2.1 (sgx neon)
> [ 0.000000] random: get_random_bytes called from
> start_kernel+0x8b/0x37a with crng_init=0
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
> 129920
> [ 0.000000] Kernel command line: console=ttyO0,115200n8
> root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait
> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 0.000000] Memory: 452740K/524288K available (9216K kernel code, 970K
> rwdata, 4052K rodata, 1024K init, 638K bss, 22396K reserved, 49152K
> cma-reserved, 0K highmem)
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB)
> [ 0.000000] .init : 0xc0f00000 - 0xc1000000 (1024 kB)
> [ 0.000000] .data : 0xc1000000 - 0xc10f2948 ( 971 kB)
> [ 0.000000] .bss : 0xc10fc3e8 - 0xc119bd8c ( 639 kB)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] ftrace: allocating 39504 entries in 78 pages
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
> [ 0.000000] No expedited grace period (rcu_normal_after_boot).
> [ 0.000000] Tasks RCU enabled.
> [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
> interrupts
> [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
> [ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
> 89478484971ns
> [ 0.000024] clocksource: timer1: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 79635851949 ns
> [ 0.000031] OMAP clocksource: timer1 at 24000000 Hz
> [ 0.000432] timer_probe: no matching timers found
> [ 0.000613] Console: colour dummy device 80x30
> [ 0.000744] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
> [ 0.000747] This ensures that you still see kernel messages. Please
> [ 0.000749] update your kernel commandline.
> [ 0.000766] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
> [ 0.019174] pid_max: default: 32768 minimum: 301
> [ 0.019414] Security Framework initialized
> [ 0.019423] Yama: becoming mindful.
> [ 0.019496] AppArmor: AppArmor initialized
> [ 0.019687] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.019695] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> bytes)
> [ 0.020576] CPU: Testing write buffer coherency: ok
> [ 0.020625] CPU0: Spectre v2: using BPIALL workaround
> [ 0.021383] Setting up static identity map for 0x80100000 - 0x80100054
> [ 0.021650] Hierarchical SRCU implementation.
> [ 0.024801] EFI services will not be available.
> [ 0.026282] devtmpfs: initialized
> [ 0.039844] VFP support v0.3: implementor 41 architecture 3 part 30
> variant c rev 3
> [ 0.040257] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.040284] futex hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.043895] xor: measuring software checksum speed
> [ 0.083220] arm4regs : 1216.000 MB/sec
> [ 0.123174] 8regs : 869.000 MB/sec
> [ 0.163169] 32regs : 1051.000 MB/sec
> [ 0.163177] xor: using function: arm4regs (1216.000 MB/sec)
> [ 0.163195] pinctrl core: initialized pinctrl subsystem
> [ 0.163870] DMI not present or invalid.
> [ 0.164299] NET: Registered protocol family 16
> [ 0.167399] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
> [ 0.184689] omap_hwmod: debugss: _wait_target_disable failed
> [ 0.229585] OMAP GPIO hardware version 0.1
> [ 0.240405] No ATAGs?
> [ 0.240422] hw-breakpoint: debug architecture 0x4 unsupported.
> [ 0.251524] raid6: using algorithm int32x8 gen() 0 MB/s
> [ 0.251542] raid6: .... xor() 0 MB/s, rmw enabled
> [ 0.251550] raid6: using intx1 recovery algorithm
> [ 0.258161] edma 49000000.edma: TI EDMA DMA engine driver
> [ 0.260271] SCSI subsystem initialized
> [ 0.260866] usbcore: registered new interface driver usbfs
> [ 0.260928] usbcore: registered new interface driver hub
> [ 0.261036] usbcore: registered new device driver usb
> [ 0.261485] omap_i2c 44e0b000.i2c: could not find pctldev for node
> /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring
> probe
> [ 0.262575] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
> [ 0.262814] media: Linux media interface: v0.10
> [ 0.262863] Linux video capture interface: v2.00
> [ 0.262919] pps_core: LinuxPPS API ver. 1 registered
> [ 0.262927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <[email protected] <javascript:>>
> [ 0.262948] PTP clock support registered
> [ 0.263067] dmi: Firmware registration failed.
> [ 0.263522] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
> [ 0.264096] Advanced Linux Sound Architecture Driver Initialized.
> [ 0.265276] NetLabel: Initializing
> [ 0.265290] NetLabel: domain hash size = 128
> [ 0.265296] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 0.265382] NetLabel: unlabeled traffic allowed by default
> [ 0.266008] clocksource: Switched to clocksource timer1
> [ 0.410468] VFS: Disk quotas dquot_6.6.0
> [ 0.410560] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> [ 0.411194] AppArmor: AppArmor Filesystem Enabled
> [ 0.420960] NET: Registered protocol family 2
> [ 0.421742] TCP established hash table entries: 4096 (order: 2, 16384
> bytes)
> [ 0.421803] TCP bind hash table entries: 4096 (order: 4, 98304 bytes)
> [ 0.421925] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.422159] UDP hash table entries: 256 (order: 2, 16384 bytes)
> [ 0.422193] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
> [ 0.422425] NET: Registered protocol family 1
> [ 0.423069] RPC: Registered named UNIX socket transport module.
> [ 0.423082] RPC: Registered udp transport module.
> [ 0.423089] RPC: Registered tcp transport module.
> [ 0.423096] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 0.423902] hw perfevents: no interrupt-affinity property for /pmu,
> guessing.
> [ 0.424020] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
> counters available
> [ 0.426228] audit: initializing netlink subsys (disabled)
> [ 0.427196] audit: type=2000 audit(0.424:1): state=initialized
> audit_enabled=0 res=1
> [ 0.427295] workingset: timestamp_bits=14 max_order=17 bucket_order=3
> [ 0.432963] zbud: loaded
> [ 0.436082] NFS: Registering the id_resolver key type
> [ 0.436123] Key type id_resolver registered
> [ 0.436131] Key type id_legacy registered
> [ 0.436149] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> [ 0.436436] fuse init (API version 7.26)
> [ 0.444349] Key type asymmetric registered
> [ 0.444371] Asymmetric key parser 'x509' registered
> [ 0.444470] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 246)
> [ 0.444679] io scheduler noop registered
> [ 0.444689] io scheduler deadline registered
> [ 0.445012] io scheduler cfq registered (default)
> [ 0.445023] io scheduler mq-deadline registered
> [ 0.446227] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800
> size 568
> [ 0.447141] gpio-of-helper ocp:cape-universal: ready
> [ 0.449209] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
> [ 0.450475] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
> [ 0.453253] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30,
> base_baud = 3000000) is a 8250
> [ 1.227137] console [ttyS0] enabled
> [ 1.232888] omap_rng 48310000.rng: Random Number Generator ver. 20
> [ 1.239913] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
> [ 1.246483] usbcore: registered new interface driver udl
> [ 1.253967] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1
> bytes/write
> [ 1.261164] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1
> bytes/write
> [ 1.268298] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1
> bytes/write
> [ 1.275418] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1
> bytes/write
> [ 1.284657] libphy: Fixed MDIO Bus: probed
> [ 1.289556] CAN device driver interface
> [ 1.346097] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus
> freq 1000000
> [ 1.353803] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
> [ 1.360381] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
> [ 1.368408] libphy: 4a101000.mdio: probed
> [ 1.372484] davinci_mdio 4a101000.mdio: phy[0]: device
> 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
> [ 1.382519] cpsw 4a100000.ethernet: Detected MACID = f4:5e:ab:35:b8:d0
> [ 1.389196] cpsw 4a100000.ethernet: cpts: overflow check period 1250
> (jiffies)
> [ 1.398335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.404943] ehci-platform: EHCI generic platform driver
> [ 1.410350] ehci-omap: OMAP-EHCI Host Controller driver
> [ 1.415784] usbcore: registered new interface driver usb-storage
> [ 1.423724] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply
> vcc not found, using dummy regulator
> [ 1.435676] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply
> vcc not found, using dummy regulator
> [ 1.449310] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
> [ 1.454688] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus
> number 1
> [ 1.462352] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 1.469175] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.476432] usb usb1: Product: MUSB HDRC host driver
> [ 1.481421] usb usb1: Manufacturer: Linux 4.14.106-bone-rt-r20 musb-hcd
> [ 1.488065] usb usb1: SerialNumber: musb-hdrc.1
> [ 1.493289] hub 1-0:1.0: USB hub found
> [ 1.497112] hub 1-0:1.0: 1 port detected
> [ 1.510401] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as
> rtc0
> [ 1.518696] i2c /dev entries driver
> [ 1.522728] Driver for 1-wire Dallas network protocol.
> [ 1.529528] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
> sec
> [ 1.536839] softdog: initialized. soft_noboot=0 soft_margin=60 sec
> soft_panic=0 (nowayout=0)
> [ 1.546596] omap_hsmmc 48060000.mmc: Got CD GPIO
> [ 1.631485] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
> [ 1.640462] omap-aes 53500000.aes: will run requests pump with realtime
> priority
> [ 1.652417] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
> [ 1.659797] hidraw: raw HID events driver (C) Jiri Kosina
> [ 1.665791] usbcore: registered new interface driver usbhid
> [ 1.669821] mmc0: host does not support reading read-only switch,
> assuming write-enable
> [ 1.672980] mmc0: new high speed SDHC card at address aaaa
> [ 1.678151] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
> [ 1.680758] mmcblk0: p1
> [ 1.694064] usbhid: USB HID core driver
> [ 1.698338] remoteproc remoteproc0: wkup_m3 is available
> [ 1.708021] NET: Registered protocol family 10
> [ 1.710199] mmc1: new high speed MMC card at address 0001
> [ 1.714129] mmcblk1: mmc1:0001 S10004 3.56 GiB
> [ 1.718073] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
> [ 1.718275] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
> [ 1.718448] mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB
> [ 1.719629] mmcblk1: p1
> [ 1.748161] Segment Routing with IPv6
> [ 1.751918] mip6: Mobile IPv6
> [ 1.754910] NET: Registered protocol family 17
> [ 1.759387] can: controller area network core (rev 20170425 abi 9)
> [ 1.765686] NET: Registered protocol family 29
> [ 1.770240] Key type dns_resolver registered
> [ 1.774532] mpls_gso: MPLS GSO support
> [ 1.778461] omap_voltage_late_init: Voltage driver support not added
> [ 1.784852] ThumbEE CPU extension supported.
> [ 1.789153] Registering SWP/SWPB emulation handler
> [ 1.794879] registered taskstats version 1
> [ 1.799121] zswap: loaded using pool lzo/zbud
> [ 1.805577] Btrfs loaded, crc32c=crc32c-generic
> [ 1.810216] AppArmor: AppArmor sha1 policy hashing enabled
> [ 1.815739] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
> [ 1.822114] ima: Allocated hash algorithm: sha256
> [ 1.864511] input: tps65217_pwr_but as
> /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
> [ 1.875740] tps65217 0-0024: TPS65217 ID 0xe version 1.2
> [ 1.881456] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
> bytes/write
> [ 1.889533] tda998x 0-0070: Error -121 writing to cec:0xff
> [ 1.895115] tda998x 0-0070: set_page 000a err -121
> [ 1.958083] tda998x 0-0070: set_page 000a err -121
> [ 2.022073] tda998x 0-0070: set_page 0001 err -121
> [ 2.026043] usb 1-1: new high-speed USB device number 2 using musb-hdrc
> [ 2.033596] tda998x 0-0070: set_page 0001 err -121
> [ 2.038467] tda998x 0-0070: set_page 0200 err -121
> [ 2.043333] tda998x 0-0070: set_page 0201 err -121
> [ 2.048198] tda998x 0-0070: set_page 0202 err -121
> [ 2.053063] tda998x 0-0070: set_page 0203 err -121
> [ 2.057928] tda998x 0-0070: set_page 0204 err -121
> [ 2.062793] tda998x 0-0070: set_page 0205 err -121
> [ 2.067658] tda998x 0-0070: set_page 020e err -121
> [ 2.072523] tda998x 0-0070: set_page 0211 err -121
> [ 2.077387] tda998x 0-0070: set_page 0207 err -121
> [ 2.082283] tda998x 0-0070: set_page 0208 err -121
> [ 2.087150] tda998x 0-0070: set_page 0209 err -121
> [ 2.092011] tda998x 0-0070: set_page 020a err -121
> [ 2.096878] tda998x 0-0070: set_page 0206 err -121
> [ 2.101743] tda998x 0-0070: set_page 0027 err -121
> [ 2.106608] tda998x 0-0070: set_page 0000 err -121
> [ 2.111472] tda998x 0-0070: set_page 0002 err -121
> [ 2.116441] tilcdc 4830e000.lcdc: failed to bind 0-0070 (ops
> tda998x_ops): -6
> [ 2.123807] tilcdc 4830e000.lcdc: master bind failed: -6
> [ 2.129377] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
> [ 2.136262] remoteproc remoteproc0: powering up wkup_m3
> [ 2.141561] remoteproc remoteproc0: Booting fw image
> am335x-pm-firmware.elf, size 217168
> [ 2.142246] bone_capemgr bone_capemgr: Baseboard:
> 'A335BNLT,00C0,'
> [ 2.142262] bone_capemgr bone_capemgr:
> compatible-baseboard=ti,beaglebone-black - #slots=4
> [ 2.165507] remoteproc remoteproc0: remote processor wkup_m3 is now up
> [ 2.165541] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version =
> 0x193
> [ 2.170975] bone_capemgr bone_capemgr: slot #0: No cape found
> [ 2.186145] usb 1-1: New USB device found, idVendor=1e0e, idProduct=9001
> [ 2.192886] usb 1-1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 2.198044] bone_capemgr bone_capemgr: slot #1: No cape found
> [ 2.205823] usb 1-1: Product: SimTech, Incorporated
> [ 2.210726] usb 1-1: Manufacturer: SimTech, Incorporated
> [ 2.216064] usb 1-1: SerialNumber: 0123456789ABCDEF
> [ 2.227064] bone_capemgr bone_capemgr: slot #2: No cape found
> [ 2.259188] bone_capemgr bone_capemgr: slot #3: No cape found
> [ 2.265011] bone_capemgr bone_capemgr: initialized OK.
> [ 2.276813] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01
> 00:00:00 UTC (946684800)
> [ 2.285487] of_cfs_init
> [ 2.288079] of_cfs_init: OK
> [ 2.291480] ALSA device list:
> [ 2.294470] No soundcards found.
> [ 2.304130] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly
> filesystem
> [ 2.311491] EXT4-fs (mmcblk0p1): write access will be enabled during
> recovery
> [ 3.703943] EXT4-fs (mmcblk0p1): recovery complete
> [ 3.713872] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 3.722095] VFS: Mounted root (ext4 filesystem) readonly on device
> 179:1.
> [ 3.733874] devtmpfs: mounted
> [ 3.739664] Freeing unused kernel memory: 1024K
> [ 4.083584] systemd[1]: System time before build time, advancing clock.
> [ 4.135281] random: systemd: uninitialized urandom read (16 bytes read)
> [ 4.145140] random: systemd: uninitialized urandom read (16 bytes read)
> [ 4.163260] systemd[1]: systemd 232 running in system mode. (+PAM
> +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
> +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
> [ 4.182137] systemd[1]: Detected architecture arm.
>
> Welcome to Debian GNU/Linux 9 (stretch)!
>
> [ 4.206489] systemd[1]: Set hostname to <arm>.
> [ 4.401471] random: systemd-gpt-aut: uninitialized urandom read (16
> bytes read)
> [ 4.774783] systemd[1]: Reached target Swap.
> [ OK ] Reached target Swap.
> [ 4.790785] systemd[1]: Listening on udev Control Socket.
> [ OK ] Listening on udev Control Socket.
> [ 4.806628] systemd[1]: Listening on Syslog Socket.
> [ OK ] Listening on Syslog Socket.
> [ 4.822881] systemd[1]: Listening on Journal Audit Socket.
> [ OK ] Listening on Journal Audit Socket.
> [ 4.838533] systemd[1]: Listening on udev Kernel Socket.
> [ OK ] Listening on udev Kernel Socket.
> [ 4.854715] systemd[1]: Started Dispatch Password Requests to Console
> Directory Watch.
> [ OK ] Started Dispatch Password Requests to Console Directory Watch.
> [ 4.878355] systemd[1]: Reached target Remote File Systems.
> [ OK ] Reached target Remote File Systems.
> [ OK ] Set up automount Arbitrary Executab…rmats File System Automount
> Point.
> [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
> [ OK ] Listening on Journal Socket (/dev/log).
> [ OK ] Created slice User and Session Slice.
> [ OK ] Listening on fsck to fsckd communication Socket.
> [ OK ] Created slice System Slice.
> [ OK ] Created slice system-serial\x2dgetty.slice.
> Mounting Debug File System...
> [ OK ] Created slice system-getty.slice.
> Mounting POSIX Message Queue File System...
> [ OK ] Reached target Slices.
> [ OK ] Listening on Journal Socket.
> Starting Journal Service...
> Starting Create Static Device Nodes in /dev...
> Starting File System Check on Root Device...
> Starting Load Kernel Modules...
> [ OK ] Started Forward Password Requests to Wall Directory Watch.
> [ OK ] Reached target Paths.
> [ OK ] Reached target Encrypted Volumes.
> [ OK ] Mounted POSIX Message Queue File System.
> [ OK ] Mounted Debug File System.
> [ OK ] Started Create Static Device Nodes in /dev.
> [ OK ] Started Load Kernel Modules.
> [ OK ] Started File System Check Daemon to report status.
> Mounting Configuration File System...
> Starting Apply Kernel Variables...
> Mounting FUSE Control File System...
> Starting udev Kernel Device Manager...
> [ OK ] Mounted FUSE Control File System.
> [ OK ] Mounted Configuration File System.
> [ OK ] Started File System Check on Root Device.
> [ OK ] Started Apply Kernel Variables.
> [ OK ] Started Journal Service.
> Starting Remount Root and Kernel File Systems...
> [ OK ] Started udev Kernel Device Manager.
> [ 5.979617] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
> [ OK ] Started Remount Root and Kernel File Systems.
> Starting udev Coldplug all Devices...
> Starting Flush Journal to Persistent Storage...
> Starting Load/Save Random Seed...
> [ OK ] Reached target Local File Systems (Pre).
> [ OK ] Reached target Local File Systems.
> Starting Raise network interfaces...
> [ OK ] Started Load/Save Random Seed.
> [ 6.293598] systemd-journald[142]: Received request to flush runtime
> journal from PID 1
> [ OK ] Started Flush Journal to Persistent Storage.
> Starting Create Volatile Files and Directories...
> [ OK ] Started Create Volatile Files and Directories.
> Starting Network Time Synchronization...
> Starting Update UTMP about System Boot/Shutdown...
> [ OK ] Started Update UTMP about System Boot/Shutdown.
> [ OK ] Started Network Time Synchronization.
> [ OK ] Reached target System Time Synchronized.
> [ 7.934333] net eth0: initializing cpsw version 1.12 (0)
> [ 7.943705] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
> [ 7.966758] cpsw 4a100000.ethernet: ALE Table size 1024
> [ 8.063417] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver
> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
> [ 8.115125] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ OK ] Started udev Coldplug all Devices.
> [ OK ] Reached target System Initialization.
> [ OK ] Listening on D-Bus System Message Bus Socket.
> [ OK ] Started Daily Cleanup of Temporary Directories.
> [ OK ] Started Daily apt download activities.
> [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
> [ OK ] Reached target Sockets.
> [ OK ] Reached target Basic System.
> [ OK ] Started D-Bus System Message Bus.
> Starting Connection service...
> Starting DUN service...
> Starting Telephony service...
> Starting Avahi mDNS/DNS-SD Stack...
> Starting LSB: Start busybox udhcpd at boot time...
> [ OK ] Started Regular background program processing daemon.
> Starting Generic Board Startup...
> Starting System Logging Service...
> Starting LSB: Load kernel modules needed to enable cpufreq
> scaling...
> Starting Login Service...
> [ OK ] Started Daily apt upgrade and clean activities.
> [ OK ] Reached target Timers.
> [ OK ] Started System Logging Service.
> [ OK ] Started LSB: Start busybox udhcpd at boot time.
> [ OK ] Started DUN service.
> [ OK ] Started Telephony service.
> [ OK ] Started Avahi mDNS/DNS-SD Stack.
> [ OK ] Started Connection service.
> [ OK ] Started Login Service.
> Starting Hostname Service...
> Starting WPA supplicant...
> [ OK ] Started WPA supplicant.
> [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
> Starting LSB: set CPUFreq kernel parameters...
> [ OK ] Started Hostname Service.
> [ OK ] Started LSB: set CPUFreq kernel parameters.
> [ OK ] Found device /dev/ttyS0.
> [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
> [ 26.237686] systemd[1]: apt-daily.timer: Adding 11h 16min 42.325144s
> random time.
> [ 26.245674] systemd[1]: apt-daily-upgrade.timer: Adding 55min
> 47.417097s random time.
> [ 27.247368] systemd[1]: apt-daily.timer: Adding 6h 38min 52.788524s
> random time.
> [ 27.255318] systemd[1]: apt-daily-upgrade.timer: Adding 14min 6.786091s
> random time.
> Starting OpenBSD Secure Shell server...
> [ OK ] Started OpenBSD Secure Shell server.
> [* ] (1 of 2) A start job is running for…network interfaces (31s / 5m
>
>
> *Here is the shell script to setup uSD card*
>
> #!/bin/bash
>
> # select sd card
> ROOTDRIVE=`mount | grep 'on / ' | awk {'print $1'} | cut -c6-9`
> if [ "$ROOTDRIVE" = "root" ]; then
> ROOTDRIVE=`readlink /dev/root | cut -c1-3`
> else
> ROOTDRIVE=`echo $ROOTDRIVE | cut -c1-3`
> fi
>
> echo "root drive is ${ROOTDRIVE}"
>
> echo "\nAvailable Drives to write images to: \n"
> echo "# major minor size name "
> cat /proc/partitions | grep -v $ROOTDRIVE | grep '\<sd.\>\|\<mmcblk.\>' |
> grep -n ''
> echo " "
>
> DEVICEDRIVENUMBER=
> while true;
> do
> read -p 'Enter Device Number or 'n' to exit: ' DEVICEDRIVENUMBER
> echo " "
> if [ "$DEVICEDRIVENUMBER" = 'n' ]; then
> exit 1
> fi
>
> if [ "$DEVICEDRIVENUMBER" = "" ]; then
> echo -e "These are the Drives available to write images
> to:"
> echo "# major minor size name "
> cat /proc/partitions | grep -v $ROOTDRIVE | grep
> '\<sd.\>\|\<mmcblk.\>' | grep -n ''
> echo " "
> continue
> fi
>
> DEVICEDRIVENAME=`cat /proc/partitions | grep -v $ROOTDRIVE | grep
> '\<sd.\>\|\<mmcblk.\>' | grep -n '' | grep "${DEVICEDRIVENUMBER}:" | awk
> '{print $5}'`
> if [ -n "$DEVICEDRIVENAME" ]
> then
> DRIVE=/dev/$DEVICEDRIVENAME
> DEVICESIZE=`cat /proc/partitions | grep -v $ROOTDRIVE | grep
> '\<sd.\>\|\<mmcblk.\>' | grep -n '' | grep "${DEVICEDRIVENUMBER}:" | awk
> '{print $4}'`
> break
> else
> echo -e "Invalid selection!"
> echo -e "These are the only Drives available to write
> images to: \n"
> echo "# major minor size name "
> cat /proc/partitions | grep -v $ROOTDRIVE | grep
> '\<sd.\>\|\<mmcblk.\>' | grep -n ''
> echo " "
> fi
> done
>
> DISK=/dev/$DEVICEDRIVENAME
> NUM_OF_DRIVES=`df | grep -c $DEVICEDRIVENAME`
>
> # Erase partition table/labels on microSD card
> sudo dd if=/dev/zero of=${DISK} bs=1M count=10
>
> # Install bootloader
> sudo dd if=./u-boot/MLO of=${DISK} count=1 seek=1 bs=128k
> sudo dd if=./u-boot/u-boot.img of=${DISK} count=2 seek=1 bs=384k
>
> # Create partition layout : sfdisk version = 2.31.1
> sudo sfdisk ${DISK} <<-__EOF__
> 4M,,L,*
> __EOF__
>
> #format partition : mkfs.ext4 version = 1.44.1
> sudo mkfs.ext4 -L rootfs -O ^metadata_csum,^64bit ${DISK}1
>
> # mount partition : son is username
> sudo mount ${DISK}1 /media/son/rootfs/
>
> # backup bootloader
> sudo mkdir -p /media/son/rootfs/opt/backup/uboot/
> sudo cp -v ./u-boot/MLO /media/son/rootfs/opt/backup/uboot/
> sudo cp -v ./u-boot/u-boot.img /media/son/rootfs/opt/backup/uboot/
>
> # kernel version : 4.14.106-bone-rt-r20
> kernel_version=`cat ./bb-kernel/kernel_version`
>
> # copy root file system
> sudo tar xfvp ./debian-*.*-*-armhf-*/armhf-rootfs-*.tar -C
> /media/son/rootfs/
> sync
> sudo chown root:root /media/son/rootfs/
> sudo chmod 755 /media/son/rootfs/
>
> # set uname-r in /boot/uEnv.txt
> sudo sh -c "echo 'uname_r=${kernel_version}' >>
> /media/son/rootfs/boot/uEnv.txt"
>
> # copy kernel image
> sudo cp -v ./bb-kernel/deploy/${kernel_version}.zImage
> /media/son/rootfs/boot/vmlinuz-${kernel_version}
>
> # copy kernel device tree binaries
> sudo mkdir -p /media/son/rootfs/boot/dtbs/${kernel_version}/
> sudo tar xfv ./bb-kernel/deploy/${kernel_version}-dtbs.tar.gz -C
> /media/son/rootfs/boot/dtbs/${kernel_version}/
>
> # copy kernel modules
> sudo tar xfv ./bb-kernel/deploy/${kernel_version}-modules.tar.gz -C
> /media/son/rootfs/
>
> # set file system table
> sudo sh -c "echo '/dev/mmcblk0p1 / auto errors=remount-ro 0 1' >>
> /media/son/rootfs/etc/fstab"
>
> # copy network interface file
> sudo cp -v ./lib/interfaces /media/son/rootfs/etc/network/
>
> # using a shared sd card with multiple beaglebone
> sudo cp -v ./lib/70-persistent-net.rules
> /media/son/rootfs/etc/udev/rules.d/
>
> sync
>
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/de4dada1-d46b-40ac-b3e1-5bd097b7a3b4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
