I have some instruments that use the old Beagle BOARD to control them remotely, they have worked for several years. Now, two of them will run correctly for a few minutes, then fail with a kernel panic.
The first line in the console log is : Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... Internal error: Oops: 5 [#1] SMP ARM ... and the last line is : Kernel panic - not syncing: Fatal exception in interrupt I do have the full trace if there's anything specific in there that would be helpful. The first thing I thought to do was to fsck the SD card, and they now come up clean. This is running Ubuntu 13.04 (GNU/Linux 3.7.10-x13 armv71) Thanks for any suggestions, Jon -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/327df572-6a55-4893-ad7c-0a4877e501e5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
