Builds fine on a beaglebone black image was build with poky from Jumpnowtek Linux beaglebone 5.0.9-jumpnow #1 Sat Apr 27 20:56:21 UTC 2019 armv7l armv7l armv7l GNU/Linux
root@beaglebone:~/librobotcontrol# make all made: build/led.o made: build/start_stop.o made: build/version.o made: build/pru/encoder_pru.o made: build/pru/pru.o made: build/pru/servo.o made: build/math/matrix.o made: build/math/ring_buffer.o made: build/math/vector.o made: build/math/quaternion.o made: build/math/polynomial.o made: build/math/algebra_common.o made: build/math/algebra.o made: build/math/kalman.o made: build/math/filter.o made: build/math/other.o made: build/model.o made: build/pthread.o made: build/mpu/mpu.o made: build/pinmux.o made: build/mavlink_udp.o made: build/cpu.o made: build/bmp/bmp.o made: build/deprecated.o made: build/motor.o made: build/dsm.o made: build/time.o made: build/io/gpio.o made: build/io/encoder_eqep.o made: build/io/adc.o made: build/io/i2c.o made: build/io/pwm.o made: build/io/spi.o made: build/io/uart.o made: build/encoder.o made: build/button.o Done making lib/librobotcontrol.so.1.0.4 made: bin/rc_bind_dsm made: bin/rc_test_servos made: bin/rc_balance made: bin/rc_test_algebra made: bin/rc_test_filters made: bin/rc_calibrate_accel made: bin/rc_test_encoders made: bin/rc_test_polynomial made: bin/rc_test_dmp_tap made: bin/rc_test_leds made: bin/rc_test_mpu made: bin/rc_test_adc made: bin/rc_cpu made: bin/rc_calibrate_gyro made: bin/rc_test_motors made: bin/rc_test_encoders_pru made: bin/rc_benchmark_algebra made: bin/rc_dsm_passthrough made: bin/rc_test_kalman made: bin/rc_test_escs made: bin/rc_calibrate_escs made: bin/rc_model made: bin/rc_test_matrix made: bin/rc_test_dmp made: bin/rc_version made: bin/rc_test_drivers made: bin/rc_blink made: bin/rc_test_bmp made: bin/rc_test_encoders_eqep made: bin/rc_altitude made: bin/rc_check_battery made: bin/rc_test_mavlink made: bin/rc_test_pthread made: bin/rc_test_complementary_filters made: bin/rc_spi_loopback made: bin/rc_calibrate_mag made: bin/rc_calibrate_dsm made: bin/rc_kill made: bin/rc_test_vector made: bin/rc_test_time made: bin/rc_test_buttons made: bin/rc_uart_loopback made: bin/rc_test_dsm made: bin/rc_battery_monitor made: bin/rc_startup_routine amf On Sunday, June 23, 2019 at 11:07:10 AM UTC-5, amf wrote: > > Are you building this on a beaglebone or desktop? > I get missing .h files when doing it on a desktop (using cross compile > tools) > building it on a Raspberry Pi, I get "build/cpu.o: file not recognized: > File format not recognized" most likely because its not being build on the > correct target. > Will have to find a bone to build it on. > > amf > > > On Saturday, June 22, 2019 at 6:49:05 PM UTC-5, Steven Coddington wrote: >> >> got it. got librobotcontrol installed. Tried to run led.c. Would not >> compile and got message " >> led.c:12:29: fatal error: rc/robotcontrol.h: No such file or directory >> #include <rc/robotcontrol.h> >> ^ >> compilation terminated. >> <builtin>: recipe for target 'led' failed >> make: *** [led] Error 1 >> >> I can see the led.h file in the directory above (in library/include/rc. >> Do I need to do something to make these includes available to compiler. >> I am using cloud9. >> Apologies for being an idiot. Just getting started. Thanks in advance. >> >> >> On Friday, June 21, 2019 at 4:56:56 PM UTC-6, Steven Coddington wrote: >>> >>> Just getting started with bb blue. Watched the Arrow Video on getting >>> started. At end it directed me to github for StrawsonDesign >>> "Robotics_Cape_Installer. >>> Unfortunately the video is two years old and that package is no longer >>> there. Those files are supposed to be on the board as shipped but I cannot >>> find them. Is there a replacement for the Strawson package, or can you >>> help me find the replacement that is allegedly on my board? >>> Thanks >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4b5603d4-473f-4e31-a051-b10fb94ce96c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
