*And reboot using *only* LAN cable connected. On Sun, Jun 23, 2019 at 10:21 PM Indiaaditya Networks <[email protected]> wrote:
> When you use the auto keyword then the Beaglebone tries to boot with those > configurations. If you have connected the USB at the time of boot and then > are trying to SSH into via eth it may not work. Best is to set the settings > in /etc/network/interfaces using USB. And reboot using on LAN cable > connected. > > *<Take whatever I said with a pinch of salt>* > > On Sun, Jun 23, 2019 at 9:09 PM Max Mustermann < > [email protected]> wrote: > >> Hi folks, >> >> I'm going nuts. All over the internet it is said, that changing >> /etc/network/interfaces should set an abitrary static ip for the >> BeagleBoard xM using ubuntu. >> >> I came across suggestions like these >> <https://sheldondwill.wordpress.com/2013/12/14/beaglebone-black-ubuntu-change-to-static-ip-address/> >> that strictly stick to the eth0-device. An other >> <http://derekmolloy.ie/set-ip-address-to-be-static-on-the-beaglebone-black/> >> configured the eth0- and usb0-device - with dirfferent adresses?! Both did >> not work for me and my Beagle. Can anybody please give me a hint how to set >> the static 192.168.178.10 for my Beagle? >> >> Max >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/a1768341-9fa0-457f-a798-4f89cff60773%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/a1768341-9fa0-457f-a798-4f89cff60773%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > Indiaaditya Networks.... Embedded System development > For industries customised needs > -- Indiaaditya Networks.... Embedded System development For industries customised needs -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAFn1SnNhn8ewVL3RkH0EGpiZE4-GKZ%3DKyp19JLxh4trYGnPevg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
