OK, my PCBs arrived today (from PCBWAY) and I assembled one (See:
https://github.com/RobertPHeller/RPi-RRCircuits/tree/master/LCCCANCape).
I plugged the cape board on and bone_capemgr sees it: (dmesg output)
[ 1.352490] bone_capemgr bone_capemgr: slot #0: No cape found
[ 1.381015] bone_capemgr bone_capemgr: slot #1: No cape found
[ 1.407867] bone_capemgr bone_capemgr: slot #2: No cape found
[ 1.431906] bone_capemgr bone_capemgr: slot #3: 'LCCCANCape
,0001,DeepwoodsSoftwar,0003 '
[ 1.432279] bone_capemgr bone_capemgr: initialized OK.
[ 1.437192] bone_capemgr bone_capemgr: loader: failed to load slot-3 0003
:0001 (prio 0)
I guess now I need to configure something somewhere so that bone_capemgr can
load the proper overlay file(s).
All this cape does is connect P9-24 (CAN1-RX) and P9-26 (CAN1-TX) to a
TCAN332DR CAN Tranceiver and then on to a pair of RJ45 jacks.
I *think* I can just use BB-CAN1-00A0.dtbo, but I am guessing that somehow I
need to let bone_capemgr know that it should load this overlay for this cape.
And then I need to get dcan1's socket device brought up.
I'm assuming the driver is compiled into the kernel: 4.14.108-ti-r106:
from /boot/config-4.14.108-ti-r106:
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
--
Robert Heller -- 978-544-6933
Deepwoods Software -- Custom Software Services
http://www.deepsoft.com/ -- Linux Administration Services
[email protected] -- Webhosting Services
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/20190625002433.37A9A26C0159%40sharky3.deepsoft.com.
For more options, visit https://groups.google.com/d/optout.
