On Wed, Jun 26, 2019 at 7:48 PM <[email protected]> wrote:
>
> Hi all,
>
> Is it possible to configure HDMI audio on the BeagleBoneBlack using a v4.8 
> stock Linux kernel?
>
> I'm working with custom hardware that is based on the BBB schematic and stock 
> Linux v4.8. The HDMI circuit is intentionally similar - the DRM and McASP 
> pins from the Sitara are connected to a tda19988. We have HDMI video working, 
> actually, but I'm struggling to configure the audio. Still learning....
>
> We're largely based on this dts with the McASP pins adjusted to use McASP1 
> instead of McASP0 per the custom hardware.
>
> I've noticed that the tda998x driver in kernel v4.8 doesn't support the 
> audio-ports setting. Is there another way to configure the audio?
>
> I've tried duplicating the above BBB overlay's settings but have found that 
> snd_soc_get_dai_name() fails because it can't find the tda19988 in the 
> component_list. Specifically, it defers the probe multiple times and 
> eventually gives up. Perhaps there is another setting the device tree that 
> will add the tda19988 to the DAI list?
>
> I've been experimenting with configuring a simple-audio-card with a dummy 
> audio codec using the snd-soc-dummy driver. It looks like the snd-soc-dummy 
> driver doesn't have any device tree bindings in kernel v4.8, but it seems 
> possible to patch them in. However, I'm not sure that this is the right way 
> to go.
>
> Perhaps there's a different approach entirely?

hdmi took for ever to get in mainline... sadly in 4.9.x

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm/boot/dts/am335x-boneblack.dts?h=v4.9.1&id=8506912b969b60aacc733315eeeb46b014d920a4

Here are some reference commits..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYgf_tDM_zaLePkhfP4yk4gSy%2Be6Yt46aKpKvZCQEx7yRQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to