Hi! On Wednesday, 3 July 2019 04:51:55 UTC+3, [email protected] wrote: > > I am trying to use GPIO with the robot control library. > But I cant find the value to pass to chip and pin > > ex : > int rc_gpio_init > <http://www.strawsondesign.com/docs/librobotcontrol/group___g_p_i_o.html#ga8276c43b1cb0aad4f7b4d08deeb7e893> > > (int chip, int pin, int handle_flags) >
I've used Derek Molloy's excellent GPIO tables for reference. Regarding your question column "Mode 7" would seem to indicate chip and pin numbers, e.g. gpio1[6] would be chip 1, pin 6. https://github.com/derekmolloy/boneDeviceTree/tree/master/docs -- Kind regards, Tarmo -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1423737c-e4d5-4a84-8d7b-ac1a1b7efe91%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
