Hello Dave, I echo the same interest. We wish to work with a pocket beagle also. An LCD screen would be nice to get visual feedback. Who is the maker/ vendor and what is the part number of the board?
Regards. On Sat, Jul 6, 2019, 5:53 AM <[email protected]> wrote: > Hi Dave, > > Did you succeed to make the LCD work on your board? > > Can you send me details of your board? Where did you buy it? I also would > like to have a pocketbeagle board, with LCD. > > I bought a pocketbeagle and I'm waiting it to arrive, but I found that the > LCD pins are not connected to the expansion headers after buying it. Since > they are the same pins connected to the boot configuration, we have them > exposed on the board connected to the resistors close to the main chip and > I hope I can hook some wires to connect an LCD, but I don't know if there > something else that I have to do, like in the software side (apart of the > BBB driver) to say to the board that I want video output to the LCD pins. > > Best > > Em segunda-feira, 11 de fevereiro de 2019 07:32:16 UTC+1, Dave escreveu: >> >> The board is PocketBeagle derived - it is not a PocketBeagle. >> It just starts with the PcoketBeagle design rather than the BBB. >> >> It removes lots of things that are not used - such as P1 and P2, >> And adds a bunch of things that are needed - such as the LCD. >> >> Some of what is added is added similar or even identical to how it is in >> the BBB rather than the PB. >> >> One of the software headaches I have with this project is that the >> software development and prototypes were all BBB's and BBBW's. >> >> >> But the first spin production boards are PB design derivatives - but with >> things like the rough equivalent of a BBB 4.3 LCD display CAPE added. >> >> To get the board to boot - I am using the PB base device Tree. It will >> not boot using a BBB deviceTree. >> >> But it appears I need to go further and strip out of the PB device tree >> stuff like P1 and P2 that I do not have. >> >> >> >> >> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/f69fcb44-66c2-43b4-9385-655b726a93bd%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/f69fcb44-66c2-43b4-9385-655b726a93bd%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHW0bcw3V8NzBuHyvT%2BO-Wv2tU5XM0pOk5-A%2Bo7tv1ZNJrW3yA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
