@Mark understand your emotions. My specific response to Boeing and $9 issue is this: Sole responsibility lies with Boeing. Blaming the engineer cannot be the solution. They had the software with them. It was they who were supposed to test it. They are responsible for the lives of numerous passengers and for the employment of 1000's of workers there. If you went to a shop and asked for soap and got manure instead, it is your job to return it to the shopkeeper and not go home and apply it all over your body. @Megha you should have done some background research before posting on this group. Many people have genuinely helped you by taking out their valuable time. But don't take their goodwill for granted. Not only does it reflect badly on you but also sheds bad light on a particular section. Do some homework and even after it you are not getting an answer request on the group.
On Thu, Jul 25, 2019 at 7:42 AM 'Mark Lazarewicz' via BeagleBoard < [email protected]> wrote: > Greetings Smegha > > Who gave you requirement? > > > Is this a college assignment and you want us to write the code? Have you > considered the professor is watching this group? Are the schools really > that poor over there or is this some embedded Boot camp where assignments > are handed out so you can get a job at Boeing for $9 an hour and cause > people to get killed on our next airplane. > Nobody's this green > > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Tue, Jul 23, 2019 at 11:14 PM, Megha Bhirade > <[email protected]> wrote: > Hi, > > I am using beagle bone black board in Linux ubuntu 16.04LTS, i need to > work on Ethernet . > > requirement is like enabling Ethernet between the Board and PC and i need > to send the data from PC and need to receive the data on beagle bone black > using Ethernet communication and once data collected that data i need to > pass to the other PC using Uart.. > > Uart enabling and transmitting the data i understood... > > please tell me how to configure Ethernet and C program to receive the data > from Ethernet.... > > please suggest me any related link for this.... > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/6932a05d-3ab0-4fab-a78d-eb285137cfa9%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/6932a05d-3ab0-4fab-a78d-eb285137cfa9%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/793154318.6387875.1564020737600%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/793154318.6387875.1564020737600%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- Indiaaditya Networks.... Embedded System development For industries customised needs -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAFn1SnP1D84jV8ZDOqZymhpbwGv0dMna%2BvZaY_%3D03Qyik52_fA%40mail.gmail.com.
