Sean, I remember I modified the TechLab IMG (below) for GamePup to make uSD image work with display and not sure I had originally tested with IOT.
My original IMG was (like you) from last spring on Pocket Beagle before I had Game Pup and Tech Lab. I am as confused as you so I am starting with workshop IMG to view and understand the process used to make an embedded IMG work. Started at http://beagleboard.org/techlab then switched between capes. I have been watching and reading the stuff at the link (above) to Embedded Apprentice Linux Engineer seminars Also I will order another PB for mating to GamePup exclusively for re-flashing tests. On Saturday, August 3, 2019 at 9:49:11 PM UTC-4, Sean Boult wrote: > > Thanks for the response, Lee. > > I am using the *bone-debian-9.5-iot-armhf-2018-10-07* image on my > PocketBeagle. I have the overlay enabled which you can see in this > screenshot below > [image: image.png] > > But when I look at the physical device I only see the backlight on, no > terminal. > [image: image.png] > > Even if I try to use fbi to display an image I get nothing so I'm a little > confused. Not sure how I can determine if this is hardware fault as you had > zero trouble with yours. > [image: image.png] > > Maybe I'm doing something wrong still? > > > On Sat, Aug 3, 2019 at 6:31 PM Lee T. Davy <[email protected] > <javascript:>> wrote: > >> Sean, >> I am getting a display as a login screen correctly with IoT img by >> manually editing and including this overlay line in boot/uEnv.txt on uSD. >> After boot I can login as debian via ssh or display with USB keyboard. >> >> # Game Pup overlay on Workshop image >> uboot_overlay_addr0=/lib/firmware/BBORG_GAMEPUP-00A2.dtbo >> >> >> >> >> The e-ale workshop img has a different font but also gives the etc/issue >> login message and with keyboard I can login. >> YouTube e-ale 2018 is very informative for learning about the BaconBits >> variation called TechLab but nothing related to GamePup display. >> https://www.youtube.com/playlist?list=PLGYJ6-t7fDZ6VgbKPTeAXOBcnAk9Fonr_ >> >> Not sure yet what a full graphical desktop LQXT img would do with 128x160 >> display (which is using this https://www.adafruit.com/product/358 spec) >> >> Not sure where you are hung "talking" to screen. >> I am learning using the co-product TechLab which has no screen with only >> one Pocket beagle between them. >> I will be ordering another with fresh separate uSD using "latest Image" >> for IoT and LQXT from Beaglebone.org/latest-images . >> >> Wish me luck and stay tuned. >> BTW, >> I am using Linux Ubuntu Studio 19.04 host and have set it as internet >> portal / sharing to USB Pocketbeagle "gadget". >> My way is different than described and is hard coded to the serial number >> of the Pocket Beagle with individually host renamed for DNS in browser. >> I also hard code in etc/hosts as static IP. >> I will have two devices simultaneously networked on USB hub. >> One TechLab and one GamePup. >> >> >> https://developer.ridgerun.com/wiki/index.php/How_to_use_USB_device_networking >> >> >> >> On Sat, Aug 3, 2019 at 8:58 AM Sean Boult <[email protected] >> <javascript:>> wrote: >> >>> Any updates with this board? I am wanting to use it for a project but am >>> hitting a wall controlling the display. >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/CAL1mSv6KBufQH9AzQwMSbSUdOvCJyMpn5hGkwU6Zn3wtrwc2bA%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/beagleboard/CAL1mSv6KBufQH9AzQwMSbSUdOvCJyMpn5hGkwU6Zn3wtrwc2bA%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ddfcddbe-e6ac-444d-b588-604c23dad538%40googlegroups.com.
