Hi, I got BeagleBone Black Wireless. I connected it to my PC running Windows 10 64-bit. After spending lots of time to find that I needed to disable Driver Signature Verification, I installed the drivers successfully from the E drive by running BONE_D64. After installation, I typed 192.168.7.2 under Firefox and got the connection timeout error. Could you please let me what to do to resolve this issue?
Also, after I pressed the reset button, the 4 LEDs near the microusb connector blinked. Then, E drive showed up on the screen. However, after a minute or so, the E drive disappeared from Windows and all those four LEDs were turned off. Is this normal? Why the E drive disappeared from Windows. Could it be that the usb cable does not supply enough power to the board? Should I use a 5VDC 2A to supply power source? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8e210cf5-65a1-45a5-a9c6-eb3f23255b85%40googlegroups.com.
