But..but.. conman sucks.... If you can ping IP's but can't ping domain names then you know it's a DNS issue. Either it's not configured or misconfigured.
I'd also suggest modifying /etc/resolv.conf but that does NOT work for me. I'd suggest adding the dns-nameserver entry to your /etc/networking/interfaces but that also doesn't work for me. One post suggests that in order for /etc/resolv.conf to work you actually need 2 name server entries ( https://superuser.com/questions/413395/dns-not-set-up-properly-in-debian-linux) : nameserver 208.67.220.220 nameserver 208.67.222.222 I'd use Googles DNS personally since my ISP actually tries to prevent me from accessing certain domains; nameserver 8.8.8.8nameserver 8.8.4.4 Good luck On Saturday, January 17, 2015 at 3:47:24 AM UTC-8, Raj_RB wrote: > > Hi, > > 1) I downloaded 'bone-debian-7.5-2014-05-14-2gb' (BBB eMMC flasher) from ' > http://beagleboard.org/latest-images' and the website given MD5 checksum > matched with my downloaded zip file. Then used Win32 Disk Imager (since > windows 7), for image writing 4GB microSD. > > 2) Inserted microSD into BBB and pressed the boot button and then applied > power using the power adapter. (Please note that I have not connected > Ethernet and USB cable for power during the whole flashing process). But > only power supply LED got lit and not the user LEDs for around 5 seconds. > Then I removed the power supply and while pressing the boot button, I > provided the power supply and then all LEDs got lit for an instance and > then the LEDs started to glow erratically. Within 20 mins all the User > LED were off and did not ON again as against the standard procedure in > which all LEDs must glow after successful flashing of eMMC. > > 3) So, I thought to see if this works and I removed the microSD and power. > Then I connected BBB with my PC (by USB) using putty (SSH). I was able to > login successfully into debian but I was not able to ping google after > adding new gateway (192.168.7.1) and changing nameserver to 8.8.8.8 in > '/etc/resolv.conf' file. > > Please note that before SSH-ing, I shared my wifi internet with BBB in > Network settings(Windows 7) and also I changed the IP address of my BBB to > 192.168.7.1. All this worked earlier for me by following this youtube link: > (https://www.youtube.com/watch?v=D-NEPiZDSx8). > > Also, BBB (Linux USB ethernet/ RNDIS gadget) in Network settings shows 'No > Internet access' eventhough I have shared internet and changed my ip > address to 192.168.7.1 with subnet mask 255.255.255.0 leaving the DNS > server addresses blank as in the youtube video. > > But now it doesn't work eventhough I have already done the same procedure > (flashing) many times now with the same result and feeling really > frustrated now. Please let me know if I am missing anything here. Is it due > to the flashing issue? > Waiting for all your inputs! Thank you!! > > > Output: > > BeagleBoard.org BeagleBone Debian Image 2014-05-14 > Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian > [email protected] <javascript:>'s password: > Last login: Thu May 15 02:19:40 2014 from 192.168.7.1 > debian@beaglebone:~$ sudo su > root@beaglebone:/home/debian# route add default gw 192.168.7.1 > root@beaglebone:/home/debian# route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 0.0.0.0 192.168.7.1 0.0.0.0 UG 0 0 0 usb0 > 192.168.7.0 0.0.0.0 255.255.255.252 U 0 0 0 usb0 > root@beaglebone:/home/debian# cat /etc/resolv.conf > domain localdomain > search localdomain > nameserver 192.168.1.1 > root@beaglebone:/home/debian# vim /etc/resolv.conf > root@beaglebone:/home/debian# cat /etc/resolv.conf > domain localdomain > search localdomain > nameserver 8.8.8.8 > root@beaglebone:/home/debian# ping http://www.google.com > ping: unknown host http://www.google.com > root@beaglebone:/home/debian# > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/15d3859c-4165-4982-aa0d-18973881147f%40googlegroups.com.
