On Thu, Sep 5, 2019 at 7:10 PM Powertourg . <[email protected]> wrote: > > Hi everyone, > > I was running Debian v9.5 on my BBB Rev C. When I used the desktop shutdown > button, the screen went blank with a blinking cursor at the top left corner. > It did this for a while, so I decided to pull the plug, instead of waiting > for it to normally shutdown (bad move, I know). When I re-applied power I got > the power LED to light, however, none of the USR lights come on. It seems as > though I corrupted either the eMMC or the EEPROM, but I'm not sure. I tried > booting to a micro SD card, which works. I then flashed the image onto the > eMMC, hoping to fix the issue. Again, same problem with attempting to boot > from the eMMC (no USR LED's and a completely dead board). The BBB also > doesn't appear on my PC as a storage device anymore. > > Is there anyway to fix/reverse this or did I trash my board? Any help would > be greatly appreciated!
What do you see for serial debug messages over the J1 debug connector? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiA8mjEZ92zUPSuRg9-LNsD24EWTiSGvHkeP2CP%2BATQLg%40mail.gmail.com.
