Hi I have a BeagleBone Black with a huge Problem
I i flashed the image Debian 9.5 2018-10-07 4GB SD IoT <https://debian.beagleboard.org/images/bone-debian-9.5-iot-armhf-2018-10-07-4gb.img.xz> I have one PC in Network 192.168.144.xxx Gateway 192.168.144.254 The Beaglebone is in network 192.168.143.xxx Gateway 192.168.143.254 My interfaces file: -------------------------------------------------------------------------------------------------------------------------------------------------------------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo eth0 iface lo inet loopback # The primary network interface # auto eth0 iface eth0 inet static address 192.168.143.207 netmask 255.255.255.0 gateway 192.168.143.254 # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE ##connman: ethX static config #connmanctl services #Using the appropriate ethernet service, tell connman to setup a static IP address for that service: #sudo connmanctl config <service> --ipv4 manual <ip_addr> <netmask> <gateway> --nameservers <dns_server> ##connman: WiFi # #connmanctl #connmanctl> tether wifi off #connmanctl> enable wifi #connmanctl> scan wifi #connmanctl> services #connmanctl> agent on #connmanctl> connect wifi_*_managed_psk #connmanctl> quit # Ethernet/RNDIS gadget (g_ether) # Used by: /opt/scripts/boot/autoconfigure_usb0.sh iface usb0 inet static address 192.168.7.2 netmask 255.255.255.252 network 192.168.7.0 gateway 192.168.7.1 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- I can't ping the BeagleBone from the PC. It is possible to ping the Gateway in 192.168.143.xxx from PC and Beaglebone. After booting the BeagleBone, the "route" command shows: -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 0.0.0.0 0.0.0.0 U 0 0 0 eth0 default 192.168.143.254 0.0.0.0 UG 0 0 0 eth0 link-local 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.6.0 0.0.0.0 255.255.255.252 U 0 0 0 usb1 192.168.7.0 0.0.0.0 255.255.255.252 U 0 0 0 usb0 192.168.143.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- There are two default routes!?!?!?!?! WHY? If i restart the network service, the first default route disappears and i can successfully ping the Beaglebone from the PC in the 192.168.144 network. What did i wrong? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a6096ac8-1396-4433-9239-80e0a1e95135%40googlegroups.com.
