Hi every body I am currently trying to build my 3D printer. For my 3D printer the controller Beagle Bone Black with bebopr Cap was used. Since my 3D printer should work with 2 extruders, I came across a problem and indeed: there are according to my research no suitable firmware, which is suitable for two extruders. I am currently using a firmware (https://github.com/modmaker/BeBoPr) that only works for one extruder and my programming experience is not sufficient to handle the C code of this firmware. if someone gave me a suggestion for a firmware I would be very happy. I forgot to mention that the extension to 5 axes I have with the help of J5Bob (https://github.com/modmaker/J5-BOB) Thank you very much in advance
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5fb2604e-a725-4665-8adb-ff22162d3d7e%40googlegroups.com.
