Hallo all, I am newbie at microcontroller business and I switched on my very first board last week. My problem is that the first step tutorials are not working any more and even worse a really important part of it is offline (or the page is broken)
Now my question: How to use the Grove-UART port as a GPIO on BBGW ? I found this at http://wiki.seeedstudio.com/Grove_Starter_Kit_for_BeagleBone_Green/ : Step1: Set the Grove - UART socket as a Grove - GPIO Socket, just follow this link.(-> http://www.seeedstudio.com/recipe/362-how-to-use-the-grove-uart-port-as-a-gpio-on-bbg.html ) I found other sites like https://community.seeedstudio.com/How-to-use-the-Grove-UART-port-as-a-GPIO-on-BBG-p-365.html for a BGG ( I hope the Grove-UARt work the same way) but this is also broken .... Can someone post the steps here? This would be nice :-) Thanks in advance -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e5e35a7c-92a3-4ece-b0e7-e2ff051c34c6%40googlegroups.com.
