Hi David, Could you provide details as to how you are using an LVDS display with the Beagle Bone Black? Also, which overlay are you using? Any other settings that you configured to get the display working?
Thanks! On Sunday, April 30, 2017 at 9:08:18 PM UTC-4, David Faulkner wrote: > > Specs: > > Beaglebone Black Rev C > Image Build 8.6 Jessie Debian > LCD- Apollo Display G104X1-L03 > > > > So I am using the Beaglebone black and pairing it with a LVDS display. I > layed out an interface board and hooked it up and at first it did not work > unless I hooked up an HDMI > interface. So I went into the uEnv.txt and unconmenteded the > cmdline=coherent_pool=1M quiet cape_Universal=enable video=HDMI- A-1 > 1024x768@60e > and now it runs on its own. However the I have the board configured for 24 > bit mode so the red and blue colors are swapped (See Picture below) > > > > I was aware that when the am335 swaps red and blue in 24 bit mode so it > makes sense as the default BSP is configured for 16. > But now I am struggling to enable 24 bit mode for the latest Jessie build. > For the early Angstrom images all you had to do was go into the > X11/xorg.conf and change the color depth from 16 to 24 and it worked. > > But for jessie if I do that it does the following on bootup: > > > I am assuming this is conflict with TI's tilcdc driver but Im not sure. > > In any case what is the best way to enable 24 bits outside of the X11 > config? > > Thanks > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3f6299be-1b0c-4731-8b30-9714fb6eb8aa%40googlegroups.com.
