I'm using the cape model: VAYU2-4GEC25-E (https://www.yantrr.com/product/vayu2-4g-ltecat4asia-eu-w-gps/) together with a Beaglebone Enhanced that running on Debian 9.5 2018-10-07 4GB eMMC IoT .
I started ppp connection as described below with wvdial: ---------------------------------------------------------- debian@beaglebone:~$ sudo wvdial & [1] 1288 debian@beaglebone:~$ --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: at+cgdcont=1,"ip","[web.omnitel.it](http://web.omnitel.it/)" at+cgdcont=1,"ip","[web.omnitel.it](http://web.omnitel.it/)" OK --> Modem initialized. --> Sending: ATDT*99# --> Waiting for carrier. ATDT*99# CONNECT 150000000 --> Carrier detected. Starting PPP immediately. --> Starting pppd at Mon Jan 20 09:30:05 2020 --> Pid of pppd: 1290 --> Using interface ppp0 --> pppd: ▒^▒(9t[01][18]9t[01] --> pppd: ▒^▒(9t[01][18]9t[01] --> pppd: ▒^▒(9t[01][18]9t[01] --> pppd: ▒^▒(9t[01][18]9t[01] --> pppd: ▒^▒(9t[01][18]9t[01] --> pppd: ▒^▒(9t[01][18]9t[01] --> local IP address 5.91.117.101 --> pppd: ▒^▒(9t[01][18]9t[01] --> remote IP address 10.64.64.64 --> pppd: ▒^▒(9t[01][18]9t[01] --> primary DNS address 10.133.18.210 --> pppd: ▒^▒(9t[01][18]9t[01] --> secondary DNS address 10.132.100.181 --> pppd: ▒^▒(9t[01][18]9t[01] ^C debian@beaglebone:~$ ^C debian@beaglebone:~$ ^C debian@beaglebone:~$ ping [google.com](http://google.com/) PING [google.com](http://google.com/) (216.58.208.142) 56(84) bytes of data. 64 bytes from [lhr25s08-in-f14.1e100.net](http://lhr25s08-in-f14.1e100.net/) (216.58.208.142): icmp_seq=1 ttl=50 time=47.7 ms 64 bytes from [lhr25s08-in-f14.1e100.net](http://lhr25s08-in-f14.1e100.net/) (216.58.208.142): icmp_seq=2 ttl=50 time=56.0 ms 64 bytes from [lhr25s08-in-f14.1e100.net](http://lhr25s08-in-f14.1e100.net/) (216.58.208.142): icmp_seq=3 ttl=50 time=48.9 ms ------------------------------------------ After I connected Ethernet wire of my subnet at beaglebone, so the mobile connection doesn't work anymore. Only if I disconnect Ethernet wire, the mobile connection works. In the Debian System Is It possible to set a connection priority between 4G connection and internet connection by LAN wire? I need to use 4g connection and ethernet port for TCPIP communications simultaneously. In which configuration file can I set this priority? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/dbc0037e-5646-4051-9613-0746dac56962%40googlegroups.com.
