The instructions below do not flash the onboard eMMC. So you will need to press the button every time to force booting from the SD card.
You probably want to use dd. Op wo 5 feb. 2020 11:57 schreef Karishma jaiswal < [email protected]>: > were you able to resolve your issue? > > On Wednesday, October 2, 2019 at 4:54:17 PM UTC+5:30, > [email protected] wrote: >> >> Hi all, >> I use Yocto to create image and boot beaglebone green wifi. like this >> introdctuion: >> >> https://embeddedguruji.blogspot.com/2019/04/steps-to-build-and-flash-yocto-image-on.html >> After flash process, board turn down, but it's still old image. Please >> help thank in advance. >> Step1: Create a folder for Yocto source code: >> *$ mkdir beagblebone_yocto && cd beagblebone_yocto* >> >> Step2: Clone the poky source code: >> *$ git clone -b thud git://git.yoctoproject.org/poky.git >> <http://git.yoctoproject.org/poky.git>* >> >> Step3: Run the environment script to setup the Yocto Environment and >> create build directory >> *$ source poky/oe-init-build-env build* >> >> Step4: Set the MACHINE variable to 'beaglebone-yocto' >> *$ echo 'MACHINE = "beaglebone-yocto"' > conf/local.conf* >> >> Step5: Build the core-image-minimal image >> *$ bitbake core-image-minimal* >> >> After a few hours, you will find the images will be present in >> *beaglebone_yocto/build/tmp/deploy/images/beaglebone-yocto* folder >> >> Step6: Take memory card and make two partitions using gparted: >> Partition1 : Size 100 MB, fat16 (boot flag) >> Partition2: Size > 2GB , ext4 >> >> Step7: Copy the files in the required partition. >> *$ cd beaglebone_yocto/build/tmp/deploy/images/beaglebone-yocto * >> *$ cp MLO-beaglebone-yocto /media/jamal/boot/MLO* >> *$ cp u-boot.img /media/jamal/boot/u-boot.img* >> *$ sudo tar -xf core-image-minimal-beaglebone-yocto.tar.bz2 -C >> /media/jamal/rootfs* >> >> Step8: Connect the Micro SD Card to the beaglebone black and to boot from >> MicroSD press the User Button(S2) While applying power. >> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/b51409ec-4d6f-4e8b-9437-6b1391b92c03%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/b51409ec-4d6f-4e8b-9437-6b1391b92c03%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK0gJ3ka11_0szjm%3DGRNOmNykf6VjePpHhB%3DGisa-RsnF5xDg%40mail.gmail.com.
