Today I tried with an overlay and it works, but with about 12 seconds of
delay.
That is not the expected result, but finally somethings moves.
Any suggestion or advise would be great.
Il giorno giovedì 27 febbraio 2020 16:14:17 UTC+1, Fabrizio Borrello ha
scritto:
>
> Hi,
> I would like to set low the logic level on the P9_11 during the power on,
> so before the linux kernel has bees loaded.
> I do not have experince with tree device and boot loader so I am here to
> ask your help.
>
>> For what I was able to discover and collecting fragmentated informations,
>>> I have to modify the file
>>> "/boot/dtbs/4.14.71-bone-rt-r17/am335x-boneblack-uboot.dtb".
>>>
>> This file should be responsable for give the earlier informations during
> the power on start up of the system.
> I have decompiled this file and added:
>
> pinmux_P9_11_gpio_pd_pin {
> pinctrl-single,pins = <0x70 0x27>;
> phandle = <0x180>;
> };
> P9_11_pinmux {
> compatible = "bone-pinmux-helper";
> status = "okay";
> pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input",
> "uart";
> pinctrl-0 = <0x17d>;
> pinctrl-1 = <0x17e>;
> pinctrl-2 = <0x17f>;
> pinctrl-3 = <0x180>;
> pinctrl-4 = <0x181>;
> pinctrl-5 = <0x182>;
> };
> P9_11 {
> gpio-name = "P9_11";
> gpio = <0x35 0x1e 0x0>;
> output;
> dir-changeable;
> };
>
> So, I guess, the system in power up will be able to set up and drive this
> PIN.
>
> Due to the lack of specific knowledge in this area now I am stuck, I don't
> know how to precede.
>
> Please help.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/dd055288-5b97-472b-9697-a20612d10ca2%40googlegroups.com.
