On Mon, Mar 9, 2020 at 8:59 AM <[email protected]> wrote: > > Hi all, > > First off, I'm a newbe to the BBG, and more familiar with electronic hardware > than software programming but thought I would give it a go. > > I have a BBG which I want to flash image with > BBB-eMMC-flasher-debian-7.8-lxde-4gb-armhf-2015-03-01-4gb.img.xz, and i has > configure the uEnv.txt to uncomment the line, but when I reboot the board > the usr led not blinking just D4 only light up. can anyone help this issue
"Why" do you want to install "debian-7.8-lxde-4gb-armhf-2015-03-01" ? At the time, the BeagleBone Green, was populated with the "latest" eMMC module from the memory Manufacture. This module used a newer spec of eMMC we had not seen before.. Thus to support the BBG, we had to patch our linux kenrel to make it work. This hardware patch made it into our kernel repo on "2016-06-15".. So a year and half "after" that image. So: "Why"... Why do you "need" to install that version? It can be done, but it will take some effort on your behalf, or you could just use a newer image.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiXwqWnhWxovAAe0oEW8AbCCPtM5H8VVg6HF5VeV1DynQ%40mail.gmail.com.
