Hello, here's my problem. So far I have always worked with the BB Black and was able to adapt the HW in the file uEnv.txt to my requirements. *uboot_overlay_addr4=/lib/firmware/BB-SPIDEV0-00A0.dtbo* *uboot_overlay_addr5=/lib/firmware/BB-I2C2-00A0.dtbo* *uboot_overlay_addr6=/lib/firmware/BB-CAN1-00A0.dtbo*
If I do that with my BB AI the board will not boot anymore. I have the latest version 9.9LXQT, kernel update,... What am I doing wrong? Which overlays are supported by the AI ? Many greetings -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f086fabf-c85d-4c5b-bfc1-eb9ba0acd890%40googlegroups.com.
