Hello, I have a RelayCape from GHI and the bbb.io peoples. I think my issue is my issue and I need assistance w/ it.
So... I connect my 12v LED to the Cape like this: - COMMON (COM) to 12v battery (positive) - NORMALLY OPEN (NO) or NORMALLY CLOSED (NC) to the LED negative lead - Then...I put an additional wire to the negative lead on the LED to the 12v battery (negative)/GND So, here lies the issue. I have tried w/ COM being my positive wire and negative wire but not at the same time or simultaneously. ... [image: SetDown.PNG] That is a small fritzing photo to give some insight. Seth P.S. Now, the Cape works w/ the source. I can turn it on and off, w/ a timer, w/ source. Some nodejs and bonesrcript does the trick. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1a86610e-a25f-4b50-bf32-c6c53725f81f%40googlegroups.com.
