This information is probably not relevant to you anymore, but I am posting it for other Googlers who come along. I am using windows 7 and I also used windows connection sharing to give internet axis to the BeagleBone Black but I did one more thing and told the DHCP which gets activated when this is done to use the network 192.168.7.0 for the connection. Here is a link which tells how to do this: https://superuser.com/questions/564103/how-to-change-the-dhcp-range-alloted-through-ics-in-windows-7-to-192-168-1-x-ran https://web.archive.org/web/20130306153037/http://support.microsoft.com/kb/230148 HKLM\System\CurrentControlSet\services\SharedAccess\Parameters (REG_SZ) ScopeAddress (REG_SZ) StandaloneDhcpAddress
If the static IP address on the computer is no longer 192.168.7.1 then it probably will no longer be able to communicate with the BeagleBone. On Thursday, April 10, 2014 at 11:57:55 AM UTC-4, [email protected] wrote: > > So I was trying to get internet on the beaglebone black by sharing it > through the usb port. However, in the steps to obtain it, I used the > command: > > route add default gw 192.168.7.1 > > and later closed the connection to the beaglebone black. Now when I > attempt to ssh back into it using the normal command > > ssh [email protected] <javascript:> > > I dont get a prompt for the password and it just hangs. I have so much > work invested into the beaglebone I am too reluctant to reset it or > anything of the like. If anyone has any idea on how to fix it, brute force > a connection, or even get the data off the beaglebone without ssh'ing into > it I would greatly appreciate it! > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e58824d7-962d-4bb9-80f5-ee55ca54d8a7%40googlegroups.com.
