On Fri, Apr 10, 2020 at 11:49 AM Farzad <[email protected]> wrote: > > hi. I use the Debian 9.12 2020-04-06 on BeagleBone AI. > for the first boot, I go to /var/lib/cloud9/BeagleBone/AI/pru directory and > run > root@beaglebone:/var/lib/cloud9/BeagleBone/AI/pru# source setup.sh > TARGET=blinkInternalLED.pru1_1 > > and run make command
> PRU_DIR = /sys/class/remoteproc/remoteproc1 > rm /tmp/cloud9-examples/blinkInternalLED.pru1_1.o > root@beaglebone:/var/lib/cloud9/BeagleBone/AI/pru# cat > /sys/class/remoteproc/remoteproc0/state > suspended > root@beaglebone:/var/lib/cloud9/BeagleBone/AI/pru# cat > /sys/class/remoteproc/remoteproc0/firmware > dra7-ipu1-fw.xem4 On the am57xx family there are many more "remoteproc" devices, the script used "remoteproc1" but you referenced "remoteproc0".. We are working on symlinks to fix this confusion, but it hasn't shipped yet. https://elinux.org/Beagleboard:BeagleBone_cape_interface_spec#PRU Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiMOJ17puUX78V92YvV0z-HartPfhCbmqTTGXo9OMn%2BHQ%40mail.gmail.com.
