On Thu, Apr 23, 2020 at 11:50 AM biggi_ <ajdeuerl...@gmail.com> wrote: > > Sorry for the book in advance, just want to make sure I outline all the steps > I did to try to get to the bottom of this. I picked up an Element14 > Industrial Version of the BBB. Trying to get Python 3.6 installed to find > out that it's not supported on the Debian 8.11 that was running. Went to > Beaglebone images and downloaded "AM3358 Debian 10.3 2020-04-06 4GB eMMC IoT > Flasher" and used Win32DiskImager to flash it to a microSD card. I also > uncommented the > "#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh" at the bottom > of the uEnv.txt file. Flash seemed to go fine, the LEDs went back and forth > then on one attempt, the LEDs were all flashing on and off at the same time.
ALL on and ALL off is an error condition, do you have usb serial adapter to plug into J1? https://elinux.org/Beagleboard:BeagleBone_Black_Serial Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhyauCJpsfT0BmtUcvKAco_JnbVAodnv4EkF_WcHD1gkw%40mail.gmail.com.
