You asked, if I had experience with TI-RTOS and if I had experience with TI-RTOS with other IDEs and I answered yes to those. However, I have nothing to prove to you or anyone else for that matter that does not provide me with a paycheck. Believe what you want, I could not care less.
However, you don't need an IDE to use any programmer, be it a Segger or other. But, then again you know all so I would expect you already have done this. Good luck. Jon On Sun, May 3, 2020 at 1:28 PM 'Mark Lazarewicz' via BeagleBoard < [email protected]> wrote: > Right Ian and I've had trouble with Segger. > They work well for some IDE. > I don't want people wasting Money like I did. > I'm very skeptical Johnny has gotten TI RTOS working on any Beaglbone it's > not supported. > And his claims that SYS BIOS( now TI RTOS) which uses autogenerated files > compiles outside of CCS are dubious. If you stick with one vendor you won't > waste weeks of Time fighting tool's. I agree 💯 with your assessment. > Perhaps I will send Johnny a $20 JTAG and ask him to share his BBAI TI RTOS > projects online using this $20 JTAG 🙈 with the group. > > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sun, May 3, 2020 at 2:50 PM, jonnymo > <[email protected]> wrote: > You must be reading a different Release note then I am reading. > This seems to show more than just cortex-m support. > > https://www.segger.com/products/debug-probes/j-link/models/model-overview/#supported-cores > > Segger does lists the J-Link EDU Mini with full J-Link support though. > There is also the $60 J-Link EDU which is basically the same as the Base > without all the extra software. > > However, the mini was just tossed out as a suggestion. Its up the > individual to do the proper research to see what works best for their > environment. > > Cheers. > > Jon > > On Sun, May 3, 2020 at 8:13 AM Iain Hunter <[email protected]> wrote: > > Hi Jonny, > Looking at that link from Segger it appears that they only support the > cortex-M core devices from TI, so that wouldn't help on a BBB. > The other factor that is important for some of us is that the Segger EDU > emulators are explicitly for non-commercial use. If you are commercial use > then you are looking at $400 which makes the TI emulators look like a > bargain. > Iain > > On Saturday, May 2, 2020 at 6:27:29 PM UTC+1, jonnymo wrote: > > Segger is an industry standard and if TI does not support it with CCS > then I would suggest another MCU vendor. > There is this though: > https://wiki.segger.com/TI_Code_Composer_Studio > > Besides, CCS is just a TI version of Eclipse, so anything that can be done > in CCS can be done in Eclipse. It may take some work to get the project > set-up, but it is possible. > > > > On Sat, May 2, 2020 at 10:10 AM 'Mark Lazarewicz' via BeagleBoard < > [email protected]> wrote: > > More how quickly they suggest using their Segger IDE. That's been my > experience.🙈 Good luck building TI RTOS in anything besides CCS. > This is there high end JTAG as well. > > > > https://forum.segger.com/index.php/Thread/4869-SOLVED-J-Link-on-Code-Composer-Studio/ > > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sat, May 2, 2020 at 12:05 PM, 'Mark Lazarewicz' via BeagleBoard > <[email protected]> wrote: > Make Sure Segger comes with .gel file for CCS and driver's for CCS. > > When you buy all TI products less head aches and better support as well > adding the JTAG support to CCS. All this must be verified before buying. > > > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sat, May 2, 2020 at 11:54 AM, jonnymo > <[email protected]> wrote: > The Segger J-Link EDU Mini is only like $20US. > https://www.adafruit.com/product/3571 > > > On Sat, May 2, 2020 at 9:21 AM 'Mark Lazarewicz' via BeagleBoard < > [email protected]> wrote: > > Right looks like a black or white is best. A board with USB JTAG is > cheaper as if $$$ are a problem the JTAG is $100+ the EVM supports JTAG > over USB that's why they support no soldering. > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sat, May 2, 2020 at 11:10 AM, jonnymo > <[email protected]> wrote: > For Ti-RTOS, you might want to start here. > http://www.ti.com/tool/PROCESSOR-SDK-AM335X > > This looks interesting: > > http://huesmanbros.com/marc/2017/09/22/getting-ti-rtos-running-on-the-beaglebone-black/ > > > There is a page for QNX on the Beagleboard site, but perhaps more specific > for the BB Black or EVM. It could be possible to try it with the Blue, but > I am not sure how they compare though. > https://beagleboard.org/project/QNX+Neutrino+on+OMAP/ > http://www.qnx.com/products/reference-design/index.html > > There are JTAG pads on the back of the Blue so you would have to carefully > solder headers to it and then use a JTAG programmer to load it. Again, all > theory in my case since I have not attempted this with my dead Blue. > > https://github.com/beagleboard/beaglebone-blue/blob/master/BeagleBone_Blue_sch.pdf > > Cheers, > > Jon > > > On Sat, May 2, 2020 at 8:53 AM 'Mark Lazarewicz' via BeagleBoard < > [email protected]> wrote: > > Hello > What I meant is learning TI RTOS us typically done using CCS and loading > via JTAG. So using a board without JTAG isn't smart. > > As far as your board I didn't see it in the supported hardware doc's you > must dig deeper to find. > > QNX and Free RTOS might support the board. > > Any RTOS typically provide Architecture Support Package (ARM) and Board > Support Package (Beaglbone) so assuming the processor is supported as it's > same also bad idea. > If you search group for RTOS you see others asking to use Beaglbone ( > white or black or BBAI > > As I mentioned it works on TI EVM hardware which is the am35xx I have one > it's $250 this group is beagleboard org hardware. The board support is > different. TI RTOS lists 4 boards no mention of Beaglbone. > > RTOS vendor test on specific board's typically in TI RTOS official TI EVM > boards. > Here's Link > http://www.ti.com/tool/TMDSEVM3517C > > Board Support Package Engineers port BSP to customer hardware sometimes > easy (your board) sometimes very hard ( custom hardware design's) > I was BSP consultant I know This > > RTOS vendor like Greenhills sell BSP packages. > > Google group and see someone asking about BBAI won't boot using TI RTOS > > I'm not such a nice Guy 😂 > > So I tell you you want to be a BSP porting Engineer or learn RTOS please > dig deeper in RTOS docs or your never going to learn. > > I'm amazed you didn't Google TI RTOS Beaglbone in group and didn't find > supported hardware in RTOS docs TI documents are world class very > thorough.Did you post this question in E2E forum? > They support TI products this group support beaglbone.org > > The Short answer is buy a TI EVM or find another RTOS (required ability to > read docs supplied by vendor), Port RTOS BSP yourself or pay big $$ to > someone to Port RTOS. > > Learning RTOS can be done by watching wonderful Tutorial on TI site but > after doing you will wish you had $$$ to buy the correct hardware. > > Good Luck > > > > > > > > > > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Sat, May 2, 2020 at 8:34 AM, [email protected] > <[email protected]> wrote: > Hi, > > I seqrched the group and couldn't find anything relevant. Also, when you > say JTAG is enabled by default, so you mean it is available on BBBlue via > USB interface? If ye it would be very surprising as I couldn't find any > material online. Could you please point meto the relevant resources? > > Many Thanks, > Prateek > > On Monday, April 27, 2020 at 2:33:19 AM UTC+5:30, lazarman wrote: > > This has been asked in here. The RTOS docs list boards supported. > The TI EVM is supported always > RTOS have ASAP & BSP and yes jtag support is default. > Whether TI adds board's is best asked in E2E forums > > > Sent from Yahoo Mail on Android > <https://overview.mail.yahoo.com/mobile/?.src=Android> > > On Sun, Apr 26, 2020 at 2:01 PM, [email protected] > <[email protected]> wrote: > Since the processor on Blue is same as the one on Black, theoretically it > should be possible. But I don't see any JTAG pins on Blue and they are used > in all the tutorials I came across for Black. I'm really unsure on if is at > all possible to get it done with the USB interface, either on Blue or Black > and if yes, what's the procedure?. Has anyone ever tried this? I'm trying > to get some hand-on experience with RTOS but getting a new hardware at > current time just isn't possible. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagl...@ googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/20922878- f3b9-4ff7-9c10-7d9d398e31ba% 40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/20922878-f3b9-4ff7-9c10-7d9d398e31ba%40googlegroups.com?utm_medium=email&utm_source=footer> > .supported > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/beagleboard/f18c61c4-d428-4e01-acd4-d84fd5aa5cff%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/f18c61c4-d428-4e01-acd4-d84fd5aa5cff%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/201415973.139794.1588434673232%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/201415973.139794.1588434673232%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkoixc4-nXBqp2ugOjg_65Pi0rTOts2GY0zUsTEVka5ciA%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAG99bkoixc4-nXBqp2ugOjg_65Pi0rTOts2GY0zUsTEVka5ciA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/1768246491.146305.1588436500699%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/1768246491.146305.1588436500699%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkpOsjKF957BgE-5aQTqYv4Juka2-imn0zazi1iYgd-0iw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAG99bkpOsjKF957BgE-5aQTqYv4Juka2-imn0zazi1iYgd-0iw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/637336746.156076.1588439126180%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/637336746.156076.1588439126180%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/1522495307.152990.1588439408604%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/1522495307.152990.1588439408604%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/494c69d4-c6b9-4553-abb9-26f67accc210%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/494c69d4-c6b9-4553-abb9-26f67accc210%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkomLv5NL%2B20wP3qvFJy2u1jQPZwTyLtNS8iAyYuuyj%3DrQ%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAG99bkomLv5NL%2B20wP3qvFJy2u1jQPZwTyLtNS8iAyYuuyj%3DrQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/1445446192.397356.1588537673072%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/1445446192.397356.1588537673072%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkr0%3DXLxKiTw0eCuR-8ydhk8amQi0S84MEWaecFiGc%2BWNw%40mail.gmail.com.
