Did you try on the latest images https://beagleboard.org/latest-images?
On Thursday, 20 June 2019 22:33:04 UTC+8, Tony Pitman wrote: > > I am trying to get the chipsee 7" cap touch lcd to work on my beaglebone > black. The board is a rev A5C. > > I added the dtb entry to uEnv.txt and did the command line to update x. > Not sure that second was needed because x isn't supported, but did it > anyway. > > The screen now turns on during boot, but nothing ever shows up. > > I don't need a GUI I just need a frame buffer. I tried doing the cat > /dev/urandom > /dev/fb0 and it first said no more room on the device. Then > each time I did it after that it just spewed random stuff to the console. > > I rebooted and now it just always says: cat: write error: No space left on > device. I assume that is because fb0 isn't really connected to anything. > > I am running the latest stretch 9.5 image from here: > > https://beagleboard.org/latest-images > > Specifically I am running this one: Debian 9.5 2018-10-07 4GB SD LXQT > <http://debian.beagleboard.org/images/bone-debian-9.5-lxqt-armhf-2018-10-07-4gb.img.xz> > > Can someone tell me how to get frame buffer to work on this setup? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0f80d411-7f02-4d76-9972-16f3f70431ea%40googlegroups.com.
