On Sun, May 31, 2020 at 2:30 PM <ckern.h...@gmail.com> wrote: > > Thanks Robert for providing these instructions. Does anyone know if there are > any changes required since they were posted in 2016? I was able to build the > linux image as described, but after installing it onto the BBB using dpkg the > board no longer boots. Instead, it hangs immediately on power-up with all 4 > LEDs on. > > Any ideas for things to try would be greatly appreciated.
First regarding, MUSB & DMA, we gave up.. It's been PIO mode by default for a few years now.. Second, which kernel are you using? Please if you can also share a usb serial boot log (using J1) https://elinux.org/Beagleboard:BeagleBone_Black_Serial Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhtBACA9%2BhC-jQR-PSpXBb9QEOWphkWz_%3D8beqspDHEFA%40mail.gmail.com.
