On Fri, Jun 19, 2020 at 11:06 AM Robert Cachro <[email protected]> wrote: > > Hello folks, > > Hope everyone has been well. > > I recently was flashing my BB Wireless (SD -> eMMC) and mid-flash lost power > to the device. After power cycling, the BeagleBone was still able to flash > properly.. or so it seemed. > > Now when I go to create a new image for production purposes (eMMC -> SD) > using the tool: /opt/scripts/tools/beaglebone-black-eMMC-flasher.sh
Did you read the readme.txt in that base directory? https://github.com/RobertCNelson/boot-scripts/tree/master/tools *************************** WARNING: Do not use: beaglebone-black-eMMC-flasher.sh init-eMMC-flasher.sh They are only in this directory for support of the Ancient 2014 release. ***************** SD -> eMMC: sudo /opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh eMMC -> SD: sudo /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh Side, note, it's been 6 years, maybe it's time to nuke all 2014 compatibility. ;) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYifCGfVoj6JAqO7YMtH-8utFUxspjxJvo-GbE-iPDCsow%40mail.gmail.com.
