The USB connector (USB-0) on the Pocket Beagle board is configured as a peripheral, only. USB-1, is configured as a "Host" and will control many USB to Ethernet adaptors, but USB-1 is not pinned out to a USB connector, just the header pins. You will need to provide some kind of USB connector to header pin connection, to do what you are trying to do.
--- Graham == On Wednesday, June 24, 2020 at 11:26:26 AM UTC-5, Szoshi wrote: > > Hello, > > I am trying to connect a PB in our network over a USB to Ethernet adapter. > I assumed that modifying the interfaces file with a static IP and rebooting > the PB will make it appear in the arp -a list but I cannot see the MAC > address of my network card, neither can I ping the static IP. > > Is there something fundamentally wrong that I might be doing here? Can > someone nudge me in the right direction? > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a85dba34-fc76-49c1-8597-f7d3eafcc455o%40googlegroups.com.