On Thu, 25 Jun 2020 12:26:35 +0100, in gmane.comp.hardware.beagleboard.user
Adrian Hatton <[email protected]>
wrote:
>Hi Robert
>
>Thanks for sharing the Debian GUI image.
>
>I did have a question, I previously attempted to update the IoT image on the
>BB AI using the SD card method and was not successful.
Which image did you have on the SD card?
>
>When you insert the SD card then boot the BB AI should you hold down any
>buttons to force a certain boot mode, or should it just directly boot from the
>SD and install the image?
Inserting an image with uEnv.txt configured to activate the flasher
mode has worked for me for some three (going on four?) years on BBB
(without touching the boot select button), and for the BB AI which doesn't
even have a boot select button.
I think the last time I needed the boot select on a BBB was when
upgrading to the last edition of Wheezy -- from a time when the eMMC u-boot
/did not/ check for an SD card from which to complete booting.
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3rl9ff9bjqu69lld3eagcr5e9bm798jjrm%404ax.com.
