On Sat, 11 Jul 2020 17:15:21 -0700 (PDT), in
gmane.comp.hardware.beagleboard.user
[email protected] wrote:
>My device manager of windows 10 cannot load CDC NCM driver when connect usb
>with BeagleBone Black.
To my knowledge, Windows uses RNDIS, not CDC (note: my system, with
both a BBB and a BBAI connected, shows two "CDC ECM" failure to load, and
under network adapters shows "Linux USB Ethernet/RNDIS Gadget" [the BBB]
and "Remote NDIS Compatible Device #2")
>
>When I connect WIndos10 by USB cable with BeagleBone AI, But i cannot send
>ping 8.8.8.8 byte.
You are unclear... WHICH device are you entering that command on.
>I cannot use network of beagleBone AI, Just I wanna to use USB Network
>with CDC NCM (USB Network Driver) .
So far as I know, CDC drivers are not available for Windows.
If, from the Windows computer, you can get a result from pinging the BB
you have a working Windows<>BB connection.
However -- by default -- Windows does NOT gateway traffic from client
devices to ITS network connection. You have to enable/configure "Internet
Connection Sharing" to route from the beagle network adapter to the host
computer Internet adapter. I can't help with that -- I connect Beagles to
my router using Ethernet cables...
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/ofbpgf92p9ln92bdrdb2v2p1gan2e8e4sr%404ax.com.
