Hi Robert, First of all, thank you for your commitment to this project and taking the time to give me a fast response. I couldn't find the driver where the -110 error is generated, but as you stated it seems that at some point in the code someone is declaring the microSD card as unable to initialize. Nevertheless I want to share the output of the same microSD card with the previous Linux distribution using debian-stretch-console-armhf-2017-06-12.tar.xz. I have run a dmesg on it after it loads without trouble and I'm pasting at the end of the email. Maybe you can give me more information to understand this question: If the microSD card is bad how can it be that it works perfectly with a previous image?
Thank you and regards, von Bergen, Federico. ``` U-Boot SPL 2018.03-00001-g21a26066ea (May 21 2018 - 15:23:05 -0500) Trying to boot from MMC1 spl_load_image_fat_os: error reading image args, err - -2 U-Boot 2018.03-00001-g21a26066ea (May 21 2018 - 15:23:05 -0500), Build: jenkins-github_Bootloader-Builder-49 OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz Model: TI OMAP3 BeagleBoard OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 Loading Environment from NAND... *** Warning - readenv() failed, using default environment Failed (-5) Beagle xM Rev C No EEPROM on expansion board No EEPROM on expansion board OMAP die ID: 037600029ff8000001578ca00f01d013 Net: usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Checking for: /uEnv.txt ... Checking for: /boot/uEnv.txt ... 289 bytes read in 30 ms (8.8 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... Running uname_boot ... loading /boot/vmlinuz-4.11.4-armv7-x0 ... 6592976 bytes read in 596 ms (10.5 MiB/s) loading /boot/dtbs/4.11.4-armv7-x0/omap3-beagle-xm.dtb ... 100095 bytes read in 503 ms (193.4 KiB/s) loading /boot/initrd.img-4.11.4-armv7-x0 ... 6006629 bytes read in 542 ms (10.6 MiB/s) debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:5ba765 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 89a45000, end 89fff765 ... OK Loading Device Tree to 89a29000, end 89a446fe ... OK Starting kernel ... [ 2.732116] tfp410 encoder0: failed to parse PD gpio [ 2.737731] connector-dvi connector0: failed to find video source [ 2.745758] Error: Driver 'tfp410' is already registered, aborting... [ 2.953430] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 [ 3.067047] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.074432] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.080810] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.087921] omap2_set_init_voltage: unable to set vdd_core [ 22.360748] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio (err=-2)! [ 22.466674] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio (err=-2)! [ 23.030822] twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22 [ 23.040344] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap [ 25.523498] OF: graph: no port node found in /ocp@68000000/isp@480bc000 /ports Debian GNU/Linux 9 arm ttyS2 rcn-ee.net console Debian Image 2017-06-12 Support/FAQ: http://elinux.org/BeagleBoardDebian default username:password is [debian:temppwd] arm login: debian Password: Linux arm 4.11.4-armv7-x0 #1 SMP Wed Jun 7 17:54:39 UTC 2017 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@arm:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.4-armv7-x0 (root@a2-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Wed Jun 7 17:54:39 UTC 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI OMAP3 BeagleBoard xM [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] free_area_init_node: node 0, pgdat c174ab40, node_mem_map df961000 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP3630/DM3730 ES1.2 (l2cache iva sgx neon isp 192mhz_clk) [ 0.000000] percpu: Embedded 17 pages/cpu @df90b000 s39436 r8192 d22004 u69632 [ 0.000000] pcpu-alloc: s39436 r8192 d22004 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 437872K/522240K available (13312K kernel code, 1565K rwdata, 5048K rodata, 2048K init, 689K bss, 35216K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0e00000 (14304 kB) .init : 0xc1400000 - 0xc1600000 (2048 kB) .data : 0xc1600000 - 0xc1787514 (1566 kB) .bss : 0xc1789000 - 0xc1835524 ( 690 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.004455] Console: colour dummy device 80x30 [ 0.004486] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.004486] This ensures that you still see kernel messages. Please [ 0.004486] update your kernel commandline. [ 0.004516] Calibrating delay loop... 595.96 BogoMIPS (lpj=1191936) [ 0.030120] pid_max: default: 32768 minimum: 301 [ 0.030517] Security Framework initialized [ 0.030548] Yama: becoming mindful. [ 0.030578] AppArmor: AppArmor disabled by boot time parameter [ 0.030883] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.030914] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.032226] CPU: Testing write buffer coherency: ok [ 0.032318] ftrace: allocating 42735 entries in 126 pages [ 0.223266] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.224029] Setting up static identity map for 0x80100000 - 0x80100098 [ 0.233428] EFI services will not be available. [ 0.234039] smp: Bringing up secondary CPUs ... [ 0.234039] smp: Brought up 1 node, 1 CPU [ 0.234069] SMP: Total of 1 processors activated (595.96 BogoMIPS). [ 0.234069] CPU: All CPU(s) started in SVC mode. [ 0.236297] devtmpfs: initialized [ 0.280914] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.281524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.281555] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.285736] xor: measuring software checksum speed [ 0.321929] arm4regs : 730.000 MB/sec [ 0.361907] 8regs : 654.000 MB/sec [ 0.401885] 32regs : 652.000 MB/sec [ 0.441864] neon : 1047.000 MB/sec [ 0.441864] xor: using function: neon (1047.000 MB/sec) [ 0.441894] pinctrl core: initialized pinctrl subsystem [ 0.446105] NET: Registered protocol family 16 [ 0.450988] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.483337] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.484252] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.562774] cpuidle: using governor menu [ 0.565368] Reprogramming SDRC clock to 400000000 Hz [ 0.572387] omap_gpio 48310000.gpio: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@a00/pinmux_gpio1_pins, deferring probe [ 0.576110] OMAP GPIO hardware version 2.5 [ 0.591735] irq: no irq domain found for /ocp@68000000/l4@48000000 /scm@2000/pinmux@30 ! [ 0.605316] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.605316] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.615020] No ATAGs? [ 0.615051] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.616363] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.616394] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.617034] OMAP DMA hardware revision 5.0 [ 0.619659] Serial: AMBA PL011 UART driver [ 0.709991] raid6: int32x1 gen() 158 MB/s [ 0.777832] raid6: int32x1 xor() 133 MB/s [ 0.845764] raid6: int32x2 gen() 196 MB/s [ 0.913726] raid6: int32x2 xor() 169 MB/s [ 0.981750] raid6: int32x4 gen() 195 MB/s [ 1.049682] raid6: int32x4 xor() 160 MB/s [ 1.117797] raid6: int32x8 gen() 179 MB/s [ 1.145477] random: fast init done [ 1.185577] raid6: int32x8 xor() 138 MB/s [ 1.253448] raid6: neonx1 gen() 874 MB/s [ 1.321380] raid6: neonx1 xor() 506 MB/s [ 1.389373] raid6: neonx2 gen() 1161 MB/s [ 1.457305] raid6: neonx2 xor() 710 MB/s [ 1.525268] raid6: neonx4 gen() 617 MB/s [ 1.593261] raid6: neonx4 xor() 473 MB/s [ 1.661224] raid6: neonx8 gen() 482 MB/s [ 1.729217] raid6: neonx8 xor() 380 MB/s [ 1.729217] raid6: using algorithm neonx2 gen() 1161 MB/s [ 1.729217] raid6: .... xor() 710 MB/s, rmw enabled [ 1.729248] raid6: using intx1 recovery algorithm [ 1.747039] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 1.755584] omap-iommu 480bd400.mmu: 480bd400.mmu registered [ 1.759918] SCSI subsystem initialized [ 1.760406] libata version 3.00 loaded. [ 1.760833] usbcore: registered new interface driver usbfs [ 1.760955] usbcore: registered new interface driver hub [ 1.761077] usbcore: registered new device driver usb [ 1.764160] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz [ 1.765014] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz [ 1.765960] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz [ 1.767120] media: Linux media interface: v0.10 [ 1.767181] Linux video capture interface: v2.00 [ 1.767303] pps_core: LinuxPPS API ver. 1 registered [ 1.767333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 1.767364] PTP clock support registered [ 1.768157] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40 [ 1.770263] NetLabel: Initializing [ 1.770294] NetLabel: domain hash size = 128 [ 1.770294] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.770416] NetLabel: unlabeled traffic allowed by default [ 1.771606] clocksource: Switched to clocksource 32k_counter [ 1.980133] VFS: Disk quotas dquot_6.6.0 [ 1.980285] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.999450] NET: Registered protocol family 2 [ 2.000762] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 2.000823] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 2.000915] TCP: Hash tables configured (established 4096 bind 4096) [ 2.001037] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.001068] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 2.001342] NET: Registered protocol family 1 [ 2.002288] RPC: Registered named UNIX socket transport module. [ 2.002288] RPC: Registered udp transport module. [ 2.002288] RPC: Registered tcp transport module. [ 2.002288] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.005340] Unpacking initramfs... [ 2.670928] Freeing initrd memory: 5868K [ 2.671691] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 2.677001] audit: initializing netlink subsys (disabled) [ 2.678558] audit: type=2000 audit(2.551:1): state=initialized audit_enabled=0 res=1 [ 2.678710] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.678894] zbud: loaded [ 2.680725] NFS: Registering the id_resolver key type [ 2.680786] Key type id_resolver registered [ 2.680786] Key type id_legacy registered [ 2.680816] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.681243] fuse init (API version 7.26) [ 2.681793] orangefs_debugfs_init: called with debug mask: :none: :0: [ 2.682128] orangefs_init: module version upstream loaded [ 2.682128] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.689575] jitterentropy: Initialization failed with host not compliant with requirements: 2 [ 2.689605] Key type asymmetric registered [ 2.689605] Asymmetric key parser 'x509' registered [ 2.689697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.690002] io scheduler noop registered [ 2.690002] io scheduler deadline registered [ 2.690155] io scheduler cfq registered (default) [ 2.690185] io scheduler mq-deadline registered [ 2.696075] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 2.696624] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 2.697326] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92 [ 2.714996] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 2.719085] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a 8250 [ 2.720245] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250 [ 2.721466] 49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250 [ 2.721618] console [ttyS2] enabled [ 2.722900] 49042000.serial: ttyS3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a 8250 [ 2.724487] Serial: AMBA driver [ 2.730224] omapdss_dss 48050000.dss: 48050000.dss supply vdda_video not found, using dummy regulator [ 2.730468] OMAP DSS rev 2.0 [ 2.730651] omapdss_dss 48050000.dss: bound 48050400.dispc (ops dispc_component_ops) [ 2.730773] omapdss_dss 48050000.dss: bound 48050c00.encoder (ops venc_component_ops) [ 2.732116] tfp410 encoder0: failed to parse PD gpio [ 2.737731] connector-dvi connector0: failed to find video source [ 2.745758] Error: Driver 'tfp410' is already registered, aborting... [ 2.792327] twl 0-0048: PIH (irq 23) chaining IRQs 305..313 [ 2.792449] twl 0-0048: power (irq 310) chaining IRQs 313..320 [ 2.831817] twl4030_gpio twl4030-gpio: gpio (irq 305) chaining IRQs 321..338 [ 2.904602] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module [ 2.940490] usbcore: registered new interface driver dln2 [ 2.944366] libphy: Fixed MDIO Bus: probed [ 2.952453] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.952484] ehci-platform: EHCI generic platform driver [ 2.952941] ehci-omap: OMAP-EHCI Host Controller driver [ 2.953430] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 [ 2.960754] ehci-exynos: EHCI EXYNOS driver [ 2.961181] tegra-ehci: Tegra EHCI driver [ 2.962707] usbcore: registered new interface driver usb-storage [ 2.964111] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 2.964172] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 2.964569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.964599] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.964599] usb usb1: Product: MUSB HDRC host driver [ 2.964599] usb usb1: Manufacturer: Linux 4.11.4-armv7-x0 musb-hcd [ 2.964630] usb usb1: SerialNumber: musb-hdrc.0.auto [ 2.965759] hub 1-0:1.0: USB hub found [ 2.965820] hub 1-0:1.0: 1 port detected [ 2.972412] mousedev: PS/2 mouse device common for all mice [ 2.974792] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48 :pwrbutton/input/input0 [ 2.981445] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.981781] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.985351] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.986267] i2c /dev entries driver [ 2.996154] ti-soc-thermal 48002524.bandgap: This OMAP thermal sensor is unreliable. You've been warned [ 2.996215] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp not accurate [ 2.996734] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.000030] sdhci: Secure Digital Host Controller Interface driver [ 3.000030] sdhci: Copyright(c) Pierre Ossman [ 3.044464] Synopsys Designware Multimedia Card Interface Driver [ 3.049224] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.052429] ledtrig-cpu: registered to indicate activity on CPUs [ 3.052612] hidraw: raw HID events driver (C) Jiri Kosina [ 3.053558] usbcore: registered new interface driver usbhid [ 3.053588] usbhid: USB HID core driver [ 3.053955] ashmem: initialized [ 3.064788] NET: Registered protocol family 10 [ 3.066345] Segment Routing with IPv6 [ 3.066436] mip6: Mobile IPv6 [ 3.066467] NET: Registered protocol family 17 [ 3.066589] Key type dns_resolver registered [ 3.066619] mpls_gso: MPLS GSO support [ 3.067047] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.074432] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.080810] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.087921] omap2_set_init_voltage: unable to set vdd_core [ 3.096099] ThumbEE CPU extension supported. [ 3.096130] Registering SWP/SWPB emulation handler [ 3.096130] SmartReflex Class3 initialized [ 3.097442] registered taskstats version 1 [ 3.097564] zswap: loaded using pool lzo/zbud [ 3.099822] Btrfs loaded, crc32c=crc32c-generic [ 3.228271] ehci-omap 48064800.ehci: EHCI Host Controller [ 3.228363] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 2 [ 3.229125] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800 [ 3.243927] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00 [ 3.244415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.244445] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.244445] usb usb2: Product: EHCI Host Controller [ 3.244445] usb usb2: Manufacturer: Linux 4.11.4-armv7-x0 ehci_hcd [ 3.244476] usb usb2: SerialNumber: 48064800.ehci [ 3.245697] hub 2-0:1.0: USB hub found [ 3.245788] hub 2-0:1.0: 3 ports detected [ 3.247375] omapdss_dss 48050000.dss: 48050000.dss supply vdds_dsi not found, using dummy regulator [ 3.247924] omapdrm omapdrm.0: DMM not available, disable DMM support [ 3.248382] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.248382] [drm] No driver support for vblank timestamp query. [ 3.272338] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.295501] Console: switching to colour frame buffer device 128x48 [ 3.310913] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.311981] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 3.314086] input: gpio_keys as /devices/platform/gpio_keys/input/input1 [ 3.315185] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.315185] sr_init: No PMIC hook to init smartreflex [ 3.315612] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.316162] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.316345] of_cfs_init [ 3.316467] of_cfs_init: OK [ 3.317382] PM: Hibernation image not present or could not be loaded. [ 3.318115] VAUX3: disabling [ 3.318695] VDAC: disabling [ 3.319213] VPLL2: disabling [ 3.324493] Freeing unused kernel memory: 2048K [ 3.337982] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.338134] mmc0: new SD card at address aaaa [ 3.342926] mmcblk0: mmc0:aaaa SU02G 1.84 GiB [ 3.345916] mmcblk0: p1 p2 [ 3.571868] usb 2-2: new high-speed USB device number 2 using ehci-omap [ 3.720458] usb 2-2: New USB device found, idVendor=0424, idProduct=9514 [ 3.720489] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.724456] hub 2-2:1.0: USB hub found [ 3.724731] hub 2-2:1.0: 5 ports detected [ 4.019958] usb 2-2.1: new high-speed USB device number 3 using ehci-omap [ 4.128540] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.128540] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.355895] usb 2-2.4: new high-speed USB device number 4 using ehci-omap [ 4.480957] usb 2-2.4: New USB device found, idVendor=0cf3, idProduct=9271 [ 4.480957] usb 2-2.4: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 4.480987] usb 2-2.4: Product: USB2.0 WLAN [ 4.480987] usb 2-2.4: Manufacturer: ATHEROS [ 4.480987] usb 2-2.4: SerialNumber: 12345 [ 6.838775] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.779907] systemd[1]: System time before build time, advancing clock. [ 7.917877] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.976837] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 7.977722] systemd[1]: Detected architecture arm. [ 7.980102] systemd[1]: Set hostname to <arm>. [ 8.884887] systemd[1]: Reached target Swap. [ 8.886108] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.889129] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.890838] systemd[1]: Created slice System Slice. [ 8.896667] systemd[1]: Mounting /sys/kernel/debug... [ 8.896972] systemd[1]: Reached target Remote File Systems. [ 8.898803] systemd[1]: Created slice User and Session Slice. [ 10.036346] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 10.593078] systemd-journald[280]: Received request to flush runtime journal from PID 1 [ 15.490325] Bluetooth: Core ver 2.22 [ 15.490478] NET: Registered protocol family 31 [ 15.490509] Bluetooth: HCI device and connection manager initialized [ 15.490539] Bluetooth: HCI socket layer initialized [ 15.490539] Bluetooth: L2CAP socket layer initialized [ 15.490600] Bluetooth: SCO socket layer initialized [ 16.259277] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 22.347503] omap_ssi 48058000.ssi-controller: ssi controller 0 initialized (2 ports)! [ 22.360748] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio (err=-2)! [ 22.462493] omap_ssi_port: probe of 4805a000.ssi-port failed with error -2 [ 22.466674] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio (err=-2)! [ 22.556060] omap_ssi_port: probe of 4805b000.ssi-port failed with error -2 [ 23.030822] twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22 [ 23.040344] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap [ 23.355987] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22 [ 23.357879] twl4030_madc 48070000.i2c:twl@48:madc: clk disabled, enabling [ 23.358428] twl4030_madc 48070000.i2c:twl@48:madc: 48070000.i2c:twl@48:madc supply vusb3v1 not found, using dummy regulator [ 23.371246] twl4030_bci 48070000.i2c:twl@48:bci: could not request vac iio channel [ 23.388854] twl4030_bci 48070000.i2c:twl@48:bci: battery temperature out of range [ 23.977081] smsc95xx v1.0.5 [ 24.144165] smsc95xx 2-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, 02:02:00:a0:13:d0 [ 24.147613] usbcore: registered new interface driver smsc95xx [ 24.214080] smsc95xx 2-2.1:1.0 eth0: hardware isn't capable of remote wakeup [ 24.214447] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.846466] Driver for 1-wire Dallas network protocol. [ 24.986175] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode [ 25.340301] omap-sham 480c3000.sham: hw accel on OMAP rev 0.9 [ 25.398620] omap-aes 480c5000.aes: OMAP AES hw accel rev: 2.6 [ 25.415344] omap-aes 480c5000.aes: will run requests pump with realtime priority [ 25.523498] OF: graph: no port node found in /ocp@68000000/isp@480bc000 /ports [ 25.756103] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy1 not found, using dummy regulator [ 25.756286] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2 not found, using dummy regulator [ 25.756591] omap3isp 480bc000.isp: Revision 15.0 found [ 25.757232] iommu: Adding device 480bc000.isp to group 0 [ 25.757354] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1 [ 25.757629] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CCP2 was not initialized! [ 25.816131] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CSI2a was not initialized! [ 25.840148] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CCDC was not initialized! [ 25.852081] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP preview was not initialized! [ 25.872070] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP resizer was not initialized! [ 25.879425] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP AEWB was not initialized! [ 25.879455] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP AF was not initialized! [ 25.879455] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP histogram was not initialized! [ 25.962982] iommu: Removing device 480bc000.isp from group 0 [ 25.963165] clk_unregister: unregistering prepared clock: cam_xclka [ 25.963287] clk_unregister: unregistering prepared clock: cam_xclkb [ 25.963531] omap3isp: probe of 480bc000.isp failed with error -22 [ 25.989318] usb 2-2.4: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 26.020385] usbcore: registered new interface driver ath9k_htc [ 26.025512] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 26.302368] usb 2-2.4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 26.553619] ath9k_htc 2-2.4:1.0: ath9k_htc: HTC initialized with 33 credits [ 26.795837] ath9k_htc 2-2.4:1.0: ath9k_htc: FW Version: 1.4 [ 26.795837] ath9k_htc 2-2.4:1.0: FW RMW support: On [ 26.795867] ath: EEPROM regdomain: 0x809c [ 26.795867] ath: EEPROM indicates we should expect a country code [ 26.795867] ath: doing EEPROM country->regdmn map search [ 26.795898] ath: country maps to regdmn code: 0x52 [ 26.795898] ath: Country alpha2 being used: CN [ 26.795898] ath: Regpair used: 0x52 [ 26.881103] ieee80211 phy0: Atheros AR9271 Rev:1 [ 27.048828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.906555] omap-twl4030 sound: twl4030-hifi <-> 49022000.mcbsp mapping ok [ 45.653350] using random self ethernet address [ 45.653381] using random host ethernet address [ 45.812591] usb0: HOST MAC 02:1c:99:03:be:5e [ 45.814453] usb0: MAC 02:f5:ca:f7:58:17 [ 46.072937] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 46.293090] configfs-gadget gadget: high-speed config #1: c [ 46.293304] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 67.037231] random: crng init done debian@arm:~$ ``` On Mon, Jul 20, 2020 at 10:38 AM Robert Nelson <[email protected]> wrote: > On Mon, Jul 20, 2020 at 8:30 AM <[email protected]> wrote: > > > > Starting kernel ... > > > > [ 2.609558] tfp410-bridge encoder0: failed to parse powerdown gpio > > [ 4.097320] mmc0: card never left busy state > > [ 4.109374] mmc0: error -110 whilst initialising SD card > > Bad microSD card.. (-110) > > Try a different one.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/zncV8OO5qAc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYg2aBCrZtxkDNiFszUJsUHbr1UOFzonRfD3nRhKn9ktwg%40mail.gmail.com > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABzkyBAJKu28oVt%2BAMDp2dHOhQ3s0GZjbUsFHLQCfcdW1rVP_A%40mail.gmail.com.
