Mark! Thank you very much for your warning words. I suppose that many of the people in this group mantain this project ad-honorem, so I tried to solve and test the stuff for myself before asking unthoughtful questions.
I used this software for my grade thesis, so when I encountered with this error I felt that at least I could spend some time trying to solve it. Furthermore, during this research I took the opportunity to learn a little bit about bootloaders, device trees and drivers in the Linux Kernel. Actually all this stuff started after trying to make use of the MPU9150 with the Linux driver. I modified the dts of the Beagleboard-xM to attach the sensor to it. Previously I did all the communication with i2c, but now with these modifications I'm able to use the iio. I still need to make it as an overlay but I'm not sure if it is currently supported for the Beagleboard-xM. Since you mentioned here is my LinkedIn profile in case you'd like to check it at a glance: https://www.linkedin.com/in/federico-von-bergen-55477248 Thank you to all the people who keep on working in this project. Regards, von Bergen, Federico On Wed, Jul 22, 2020, 20:22 'Mark Lazarewicz' via BeagleBoard < [email protected]> wrote: > Hello Fredrick > Good job in my mind this explains everything > > to put it in a reset state. Otherwise, we will encounter this error > that prevents boot: > to put it in a reset state. Otherwise, we will encounter this error > that prevents boot: > > For me there is nothing to debug its obvious > > The Patch is Balena so no need to contact and XM is old > > My interest was purely from a driver stand point. > > you were studious, did your homework and tested it. Isn't that what good > engineer's do😀 > > I'd hire you For a job > > some others recently posting in here asking very obvious questions never > googling asking very needy questions about serial terminal have zero future > in embedded. > > > We had Engineer's like that in the mid 80s all questions no research. > My boss used to tell them to get a refund For their education. > Unfortunately these recent posers get a free education haha > > I hate to be negative but it's very pathetic some question asked in here > > Good work > > Take care > > Mark > > Sent from Yahoo Mail on Android > <https://overview.mail.yahoo.com/mobile/?.src=Android> > > On Wed, Jul 22, 2020 at 3:46 PM, Federico von Bergen > <[email protected]> wrote: > Hi Dennis, > > Well it seems that my timing was perfect... A commit was made in which the > kernel version was bumped > https://github.com/balena-os/balena-beaglebone/commit/29a9134e1ef339a1d095bac29845926ab24d4082#diff-4470acaf0380a22333703788f18deb01 > . > The new location of the patch is here: > https://github.com/balena-os/balena-beaglebone/blob/29a9134e1ef339a1d095bac29845926ab24d4082/layers/meta-balena-beaglebone/recipes-kernel/linux/linux-beagleboard-5.4/0001-card-power-cycle.patch > > Regards, > von Bergen, Federico. > > On Wed, Jul 22, 2020 at 5:30 PM Dennis Lee Bieber < > [email protected]> wrote: > > On Wed, 22 Jul 2020 12:47:35 -0300, in gmane.comp.hardware.beagleboard.user > Federico von Bergen > <[email protected]> wrote: > > > >Sure the patch is this one: > > > https://github.com/balena-os/balena-beaglebone/blob/master/layers/meta-balena-beaglebone/recipes-kernel/linux/linux-beagleboard-4.14/0001-card-power-cycle.patch > > ... which results in a 404 Page Not Found error when I click on > it; no > idea if others can reach it (perhaps one needs an account with github?) > > > > -- > Dennis L Bieber > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/zncV8OO5qAc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/m38hhfdqbtmjc7bt524scs7eftodqas7qr%404ax.com > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/beagleboard/CABzkyBBkWbQBToZ0EEeH%2B7BBJXka290-BdahLBjSL-Zj65-gVw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CABzkyBBkWbQBToZ0EEeH%2B7BBJXka290-BdahLBjSL-Zj65-gVw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/zncV8OO5qAc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/2022125019.4064274.1595460109275%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/2022125019.4064274.1595460109275%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABzkyBC-%2BCi3bPgTvEUojdEHNpZ_cMg3TMAFxdEM_ax_15rgVA%40mail.gmail.com.
