It should work on an original pocket beagle. Like I told Sam Park in a separate thread, you basically must have a serial debug adapter connected to the device to debug u-boot issues.
I can say that I have followed rcn's instructions for building and installing u-boot and followed octavo's directions for modifying a board with a blank eeprom, and things worked perfectly, for me. Good luck! On Thu, Aug 13, 2020, 11:12 AM Joshua Park <[email protected]> wrote: > > Hi all, > > I'm currently working on a project involving a custom SBC based off the > Pocket Beagle. I'm in the process of building a image for it and I am > trying to utilize a blank board ID mentioned here: > https://octavosystems.com/app_notes/osd335x-eeprom-during-boot/. However > upon testing, I found out that the image for some reason does not boot on > the original Pocket Beagle. Why is this the case? As far as I know, > utilizing a blank board ID is not the recommended way to boot however I > don't see why it shouldn't boot with the original Pocket Beagle. Thanks. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/1715f20d-48b4-4a31-b330-b950ccad2059n%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/1715f20d-48b4-4a31-b330-b950ccad2059n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGS%2B2h8SUbOOW7riBCdswV4AQf027e6YVNAdrRBqtMcOVWo_bg%40mail.gmail.com.
