On Fri, Aug 14, 2020 at 12:19 PM Joshua Park <[email protected]> wrote: > > Hello everyone, > > I've built a pocket beagle Debian image following this tutorial and I have > confirmed that software that is preinstalled in the Bone Debian images for > pocket beagle that establish the network over USB (assigning the host > computer 192.168.7.1 and itself 192.168.7.2) remains the same with the image > that I built. However, the USB network does not work out of the box for the > image that I built. Can anyone point me in the right direction on what to > configure in order to get the USB network working?
In the last year there has been a lot of churn in the boot script used to enable the usb-gadget configuration.. For a board with normal ethernet, running: git pull under /opt/scripts/ should be enough.. but for PocketBeagle.. HEre's a newer version of the RootFileSystem, just haven't pushed it to the eewiki yet.. https://rcn-ee.net/rootfs/eewiki/minfs/debian-10.5-minimal-armhf-2020-08-02.tar.xz Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjf5U2bYi8VJs5jU3KEuHyuB8CSyMo227Naox4Gh2b7LA%40mail.gmail.com.
