Hi,
I am using the pocket beagle for a project and I am unable to set up a proper Xenomai Kernel with working remoteproc (PRUs). The Kernels I tried lost the /sys/class/remoteproc/remoteproc 1 to 2 interface, used to interact with the PRUs as soon as i patched Xenomai. This even happened when using the ready to use Xenomai Kernels from RobertCNelson. I was not able to find some obvious errors Uboot and the Kernel start up fine, without any error. But dmesg is missing the remoteproc initialisation (but Xenomai seams to run fine). I found a lot of discussion in the forums, but most of it seams to be old/stale information by now. Where to I start to get a Xenomai Kernel with working PRUs, which I can use with the default debian Image? If you could provide me with a few pointers I would be very thankful :) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b0fe624d-e83d-464f-b75e-c635966fcc15o%40googlegroups.com.
