On Thu, Aug 27, 2020 at 1:51 PM Pavel Yermolenko <[email protected]> wrote: > > I apologize for my ignorance, but I don't know what "mainline u-boot" is.
master branch of https://github.com/u-boot/u-boot > > Just use the dd commands for MLO/u-boot.img if you want the BOOTROM to > use it. The "file" version requires a very specific location and > format. > > Doing sd-card setup I used dd commands ... as you described here. > https://www.digikey.com/eewiki/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-SetupmicroSDcard > Running these commands was the first step in this setup. > Last step was copying MLO and u-boot.img in rootfs partition of sd-card ... > also as you described in above-mentioned link. > Where did I go wrong? hold the boot button down, to force it to read from the microSD.. eMMC is first on power up, unless teh button is pressed. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYi2EY1%3DCsApdjD9EwoEKJrbeQdYwko1p28Yoc1CsuCwWQ%40mail.gmail.com.
