If you are willing to reimage the Beaglebone, why not just download Etcher on your Windows system and then burn a Beagleboard flasher image to an uSD card and then boot the BBB with the flasher image to refresh the eMMC?
Etcher Windows: https://www.balena.io/etcher/ Beagleboard images: https://beagleboard.org/latest-images If you have another Linux based board such as Raspberry Pi, you could try to read the BB image on that using a uSD USB reader. The other option is to install a tool on your Windows system that allows you to read the Linux filesystem and then edit any file you changed. I suspect either /etc/resolv.conf' or your interfaces file. https://www.howtogeek.com/112888/3-ways-to-access-your-linux-partitions-from-windows/ https://www.diskinternals.com/linux-reader/ Cheers, Jon On Sat, Sep 19, 2020 at 7:54 AM Gwen Stouthuysen <[email protected]> wrote: > As far as I am knowledgeable, the ip address of the debian image is > 192.168.7.2 > 192.168.7.1 is the socket of the USB networking adapter at the Windows > side. > > The FTDI adapter is an option to look into the real boot process. > But dont take it for granted, when i power the bbb from a USB power plug > it's baud rate is different . > Who knows why? > > Gwen Stouthuysen > > Op za 19 sep. 2020 16:40 schreef Dennis Lee Bieber < > [email protected]>: > >> On Sat, 19 Sep 2020 14:35:29 +0200, in >> gmane.comp.hardware.beagleboard.user >> Pieter Beneke <[email protected]> wrote: >> >> >> > >> >Unless there is some other serial port I am not aware of? >> >> >> > >> > >> >Unless there is some other serial port I am not aware of? >> >> The hardware console/debug port that is on the 6-pin header. >> You'll >> need a 3.3V compatible FTDI adapter. >> >> >> https://www.amazon.com/Converter-Terminated-Galileo-BeagleBone-Minnowboard/dp/B06ZYPLFNB >> claims to be Beaglebone compatible -- others have loose leads, which >> allows >> them to be used with devices having different pin-outs >> >> https://www.amazon.com/ADAFRUIT-Industries-954-Serial-Raspberry/dp/B00DJUHGHI/ref=rtpb_3?pd_rd_w=nxwqS&pf_rd_p=49740592-2805-416d-896c-b825ad91c2cf&pf_rd_r=9EW8MP06H9544B0KZ8PA&pd_rd_r=4088b22e-a62e-4a46-a474-bf2dcce33875&pd_rd_wg=00Qmu&pd_rd_i=B00DJUHGHI >> >> >> -- >> Dennis L Bieber >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/116cmfpsr9avgf7250krpjsus8905o2nnc%404ax.com >> . >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAFfeaG-T9mRTybcHi0XQF6TnsLY7bdwVhZw4jzQ8EAUerX_crw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAFfeaG-T9mRTybcHi0XQF6TnsLY7bdwVhZw4jzQ8EAUerX_crw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkrQDJ6vtm3VU9nNoxwoHiCChjKCVa-hS_gRTLE38mrw9Q%40mail.gmail.com.
