On Sat, 26 Sep 2020 07:58:02 -0700 (PDT), in gmane.comp.hardware.beagleboard.user Thein Htet Aung <[email protected]> wrote:
>I am very new to the beaglebone blue. I have some serious difficulty in >learning how to use it. I have found some examples to try out from >https://github.com/beagleboard/librobotcontrol/tree/master/examples/src. >But if it's possible I would like to learn from a dedicated book that can >guide me nicely. Does anyone have any suggestion? > I have never heard of a book specific to the Beaglebone Blue variant. Most books will be for the Beaglebone Black (and many of them are so old they might not be worth the hassle -- Angstrom OS has not been updated for years, the Debian OS hasn't used a FAT partition almost as long). Molloy's "Exploring Beaglebone" 2nd Edition is the most recent book I know of, and for the robotics side you might need to look at generic (Arduino/BASIC Stamp) guides for robotics and map the features they discuss into the features of the robotics library. I own three books on "Embedded Linux", but none seem suitable for your goals. They all seem to focus more on how to configure a Linux system from scratch for a board (build system, device drivers, file system choices, boot system). -- Dennis L Bieber -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0ooumfld1ghujf88lnvb018bmikfbsd3f0%404ax.com.
