Hi, I am trying to use Adafruit's Si5351 clock generator with BBB. I added Si5351in I2C device tree overlay (BB-I2C1-00A0.dts) by following */kernel/Documentation/devicetree/bindings/clock/silabs,si5351.txt*
I also added Si5351 as a kernel module and recompiled the kernel. I am able to see Si5351 on register 60 of i2c1 when I execute "*i2cdetect -y -r 1*" but during boot up I see following errors: si5351 3-0060: unable to read from reg10 si5351 3-0060: unable to read from reg2c si5351 3-0060: unable to read from reg11 si5351 3-0060: unable to read from reg34 si5351 3-0060: unable to read from reg12 si5351 3-0060: unable to read from reg3c si5351 3-0060: unable to read from reg10 si5351 3-0060: unable to read from reg2c si5351 3-0060: Cannot set rate : -22 si5351 3-0060: unable to read from reg11 si5351 3-0060: unable to read from reg34 si5351 3-0060: unable to read from reg12 si5351 3-0060: unable to read from reg3c Any help would be greatly appreciated! Thank you -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f7c45152-ccfd-4ddc-b3ba-2f3f1f089b98n%40googlegroups.com.
